How to Install a Spectis Wall Niche
A Spectis niche is a shallow display recess. Surface mounted sits on the face of the wall. Recessed goes into the wall. Both are trim, not a structural opening.
For a surface-mounted niche, the wall only has to be flat and finished. Bed the back in PLP100 and fasten it while the adhesive sets. For a recessed niche, frame the opening to the outside size on the catalog plate before you order. The niche does not carry the wall load around that opening.
Pieces ship factory primed. Fill fastener holes, then paint. Use PLP100 on bedding faces and butt joints. Do not substitute another construction adhesive.
Sep 30th 2026
Recent Posts
-
Spectis Moulding Product Warranty
SPECTIS MOULDERS INC. herein referred to as the "seller", warrants its products against defects in m …Sep 30th 2026 -
Physical Properties of Spectis Products
PHYSICAL PROPERTIES OF SPECTIS MOULDING PRODUCTS DENSITY SPECTIS products are made with high densit …Sep 30th 2026 -
Which Spectis Piece Goes Where: Porch, Gable, Window, Ceiling
Porch. A hollow column wraps a post that already carries the load. A structural column, with a 4-1/2 …Sep 30th 2026