Spectis and Fypon: Where a Profile Matches
Fypon and Spectis are both urethane millwork lines. A match is a specific profile, not the whole catalog. This page only names the cross-references already printed on Spectis product pages.
MD1354 is listed as a compatible alternative to Fypon CCA32X10. The Spectis plate is 4 1/2 inch projection, 9 3/4 inch height, and 144 inch length. MD1900 is listed as a compatible alternative to Fypon MLD240-8. Read the Spectis plate for projection, height, and length before you treat it as a swap. A similar look is not the same stick if those three numbers differ.
Order the Spectis SKU on spectis.us. Parts are made to order and ship primed. Use PLP100 on bedding faces and butt joints. This post does not quote Fypon prices, load ratings, or sizes that are not on the Spectis page.
Recent Posts
-
Spectis Moulding Product Warranty
SPECTIS MOULDERS INC. herein referred to as the "seller", warrants its products against defects in m …Sep 30th 2026 -
Physical Properties of Spectis Products
PHYSICAL PROPERTIES OF SPECTIS MOULDING PRODUCTS DENSITY SPECTIS products are made with high densit …Sep 30th 2026 -
Which Spectis Piece Goes Where: Porch, Gable, Window, Ceiling
Porch. A hollow column wraps a post that already carries the load. A structural column, with a 4-1/2 …Sep 30th 2026