7" Square-Profile Railing System

7" Square-Profile Railing System

Spectis 7" Square-Profile Railing System: polyurethane rails with matching balusters

Three 7" rail profiles with a squarer, more architectural edge than the Classic. RAL2111 measures 7" × 4". RAL2102 pairs a 7" top with a 6½" bottom and stands 5½" tall. RAL2113 comes in a Stucco Stone texture.

What goes into each railing section

  • Rails: one top rail and one bottom rail per section from the RAL2111, RAL2102, RAL2113 family. They come in 8, 10 or 12 ft lengths and are cut to fit between posts.
  • Balusters: 62 Spectis baluster styles whose own product listings say they fit these rails. Spacing follows the 4-inch sphere rule.
  • Newel post and cap: No newel post or cap is matched to these rails in our listings yet. Ask us for a recommendation.
  • Installation pieces: KIR01 rail kit for RAL2111 and RAL2113, KIR02 for RAL2102. SUP03 (4") or SUP04 (2") support blocks are listed for RAL2102.

Picking baluster height

Target top-rail heightSupport blockBaluster length needed (approx.)
30"4"18"
30"2"20"
36"4"24"
36"2"26"
42"4"30"
42"2"32"

Finished height ≈ support block + bottom rail (4") + baluster + top rail (4"), using RAL2111 dimensions. This is a planning estimate only. Check local code (typically 36" for homes and 42" for guards) and the drawing for each part before ordering. Rails end at newels, columns or walls and are never joined to one another.

Compatibility on this page is taken from the "rails that fit" information on each Spectis product listing, together with the Spectis Balustrade Systems catalog for hardware, newels and caps.

Want us to put together the parts list? Send your plan or photos, or call 800-986-1250.

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Total: items /

Adding your products to cart