RAL2102 Railing System with BAL2088 Baluster Combinations
- SKU:
- RAL2102-BAL2088-25-SYSTEM
- Width:
- 6.50 (in)
- Height:
- 144.00 (in)
- Depth:
- 5.50 (in)
- Shipping:
- Calculated at Checkout
Description
RAL2102 Railing System with BAL2088-25 Balusters — 12 ft
Coordinate a decorative 12-foot railing section with one RAL2102T top rail, one RAL2102B bottom rail and 24 BAL2088-25 balusters. The slim turned balusters have round ends and a smooth finish. Made from high-density polyurethane, supplied primed for painting and assembled on site.
Decorative application only
The BAL2088-25 product card identifies this baluster as decorative only, with no internal pipe, and states that it does not meet the 4-inch ball rule. This set should not be represented as a compliant protective guard. Confirm suitability for the intended application before ordering.
RAIL LENGTH
12 ft / 144″
BALUSTERS
24 × BAL2088-25
MATERIAL
HDP urethane
FINISH
Smooth, primed white
What comes with your set
One top rail
RAL2102T · 12 ft long, 7″ wide × 5½″ high.
One bottom rail
RAL2102B · 12 ft long, 6½″ wide × 5½″ high.
Matching balusters
24 BAL2088-25 balusters, each 25″ high with 1″ round ends and a turned center up to 2″ wide. This model has no mounting pins.
Installation accessories
Newel posts, hardware, adhesive and fasteners are sold separately. Shop newel posts · Shop hardware kits
Your set at a glance
Plan the assembled height
The nominal rail-and-baluster assembly is 36″ high: 5½″ top rail + 25″ baluster + 5½″ bottom rail. This excludes any clearance beneath the bottom rail.
Layout the actual span
The set includes 24 balusters for two 12-foot rails. Determine actual post spacing and end gaps before cutting or fixing components. The illustrated spacing is not a code-compliance layout.
Installation & finishing
Fit the complete system
Confirm the selected profiles, assembled height, mounting conditions and attachment method before ordering. Follow the manufacturer’s instructions and have your installer verify the layout for the intended application.
Adhesive and paint
Use ADH100 adhesive on bedding and butt joints together with the specified fastening method. Follow Spectis preparation and painting instructions. Read the installation guide.
Plan your order & delivery
Made for your project
Made-to-order products cannot be returned. Confirm the rail length, baluster model, assembled height and accessories before ordering.
Long rails ship freight
This railing set ships by LTL freight. Arrange for someone to receive and inspect the components at delivery.
Check the delivery address
Freight requires a verified commercial address with access for a 52-foot trailer. A home business is residential. A $275 residential fee applies if the carrier classifies the address as residential.
Allow time for production
The current estimate is typically 2–3 weeks from the order date. Contact Spectis to confirm timing for your project.
Works with RAL2102-BAL2088-25-SYSTEM — complete the look
Spectis parts made to go with this item, from the Spectis catalog and product drawings.
Each part is sold separately. Confirm profiles and dimensions against the drawings before ordering.
Railing set FAQs
Does the set arrive assembled?
No. Matching components are supplied for on-site layout, assembly and finishing.
Are posts included?
No. Newel posts, installation hardware, adhesive and fasteners are ordered separately.
Why does the photo show five balusters?
Shortened assembly detail shows five balusters. Your set includes 24 balusters and both full 12-foot rails.
What determines the price?
The listed set includes one 12-foot top rail, one 12-foot bottom rail and 24 BAL2088-25 balusters.
Is this suitable as a protective guard?
BAL2088-25 is identified as decorative only, does not meet the 4-inch ball rule and has no internal pipe. Confirm the appropriate system for any application requiring a protective guard.
Need help planning your railing?
Have your measurements and RAL2102 pairing ready.
Related Products
Related Products
