Balustrade Installation Guide
Explore the illustrated Spectis balustrade guide, from planning and newel anchoring through rail assembly, caps and finishing.
Technical review draft - not approved for installation. This illustrated guide is being checked for kit-specific hardware, adhesive requirements and specialty connections. Before installation, use the current instructions supplied with your products and confirm the requirements for your project.
Read the manufacturer’s installation instructions | Ask about your installation
Read the eight pages below. Select a page image to open a larger view. You can print this page using your browser’s Print command.
- 1. Plan the complete system
- 2. Lay out and measure
- 3. Anchor to the structure
- 4. Set posts and bracket heights
- 5. Build the rail sections
- 6. Fit and secure the panels
- 7. Stairs and round columns
- 8. Cap, finish and inspect
1. Plan the complete system
2. Lay out and measure
3. Anchor to the structure
4. Set posts and bracket heights
5. Build the rail sections
6. Fit and secure the panels
7. Stairs and round columns
8. Cap, finish and inspect
