Crown Nosing
Crown nosing is the small nose molding that finishes the outer edge of a soffit, a mantel shelf, or the front of a cornice box. Every piece is cast from high-density polyurethane, factory-primed, and ready to paint.
What size crown to order
Crown fails when it is too small for the wall or too deep for the soffit. Height is the vertical face. Projection is how far it comes off the wall. Both numbers are on the cut sheet for that profile.
| Ceiling or eave | Crown height | Projection | Start with |
|---|---|---|---|
| 8 ft | about 3–5 in | under about 4 in | Decorative crown, base crown, crown nosing |
| 9 ft | about 5–7 in | about 3–6 in | Crown with base, dentil crown, decorative crown |
| 10 ft | about 6–9 in | about 4–8 in | Crown with flat stock, box crown, fossil stone |
| 12 ft or an eave | 9 in and up | often 6–16 in | 2 step crown, boxed crown, dentil crown, concrete finish |
Confirm the cut-sheet height against the actual wall. These ranges are a start, not a substitute for the plate.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
MD1143 Spectis Crown Molding Nose 2 1/2"P x 2 3/4"H x 144"L
Now: $117.00Was: $148.00MD1143 moulding, 2 1/2 in projection. A primed urethane profile. Paint it after it is up. 2 1/2 in off the wall and 2 3/4 in tall. Write the profile number down if you are matching an exNow: $117.00Was: $148.00 -
MD1103 Crown Nose Molding Trim 1 1/2"P x 2 3/8"H x 12'L
Now: $64.00Was: $83.00MD1103 moulding, 1 1/2 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 1 1/2 in off the wall and 2 3/8 in tall. The photo shows the idea. ThNow: $64.00Was: $83.00