BL2401 Eave Block or Bracket

(No reviews yet) Write a Review
SKU:
BL 2401
MPN:
BL 2401
Condition:
New
Availability:
Typically Ships within 2-3 weeks from Order Date
Shipping:
Calculated at Checkout
On Sale
  • BL2401 Eave Block or Bracket 9.25"W x 6"H x 15" P
  • BL2401 Corbel Block or Eave Bracket 9.25"W x 6"H x 15" P
  • BL2401 Corbel Block or Eave Bracket 9.25"W x 6"H x 15" P
Now: $82.00
Was: $105.00

Sold Out

Frequently bought together:

Description

BL 2401 , 9 1/4 in wide by 6 in tall.

Poured for your order. It is not a piece we keep on a shelf. This one is 9 1/4 in wide, 6 in tall, and 15 in deep. The photo shows brackets on a house. The drawing is the size of this one.

9 1/4 in by 6 inWidth 9 1/4 in, height 6 in, projection 15 in. Projection is how far it comes out from the wall.
A bracketIt sits under an eave, a porch beam, or a shelf. Width, height, and projection are on the drawing.
Measure the eaveProjection has to fit under the overhang. If the piece is deeper than the eave, it will not sit flat.
Made for this orderPoured when you order it. It is not stocked, and it cannot be returned.

Shipping

Usually parcel

A single piece, or a few, normally goes by parcel.

A large order can go freight

This one is over 10 inches in at least one direction. Buy a lot of them and the load may have to ship LTL freight instead of parcel.

If it goes by freight

Freight needs a verified commercial address that a 52-foot trailer can pull into. A house with a business in it does not qualify. If the carrier calls the address a residence, a $275 fee is added. You get a confirmation letter, and you can correct the address or pay the extra freight.

How long

The order goes to the Spectis plant in Manitoba the same day. Shipping from Canada typically takes two to three weeks.

How to read the size

Width is across the face. Height is top to bottom. Projection is how far it comes out from the wall. All three are on the drawing. A bracket that is deeper than the overhang will not fit.

How it goes up

Set it against a clean, solid surface. Bed it with PL Premium and fasten it with screws or finish nails. Use PL Premium on every bedding face and every joint. It is urethane based. Other adhesives can damage the product. Buy PL Premium. Nails and finish are sold separately.

How to install eave corbels, blocks, and brackets

Black brackets holding a garage overhang

Back to blocks and brackets

Spectis Catalogue Volume 8Spectis Catalogue Volume 8

BL 2401 drawing

Download the BL 2401 drawing

Questions

What is it made of?

High density polyurethane. It cuts, nails, and glues like wood, and it is used inside and outside. Installed properly, it will not rot, warp, or crack. It ships double primed and ready for latex paint. No sanding, and no extra primer.

Can this go outside?

Yes. Most of these are used under an eave. The same material is used inside. Do not set it over wallpaper.

Which glue?

Use PL Premium on every bedding face and every joint. It is urethane based. Other adhesives can damage the product. Buy PL Premium. Nails and finish are sold separately.

Can I hang weight from it?

No. It is decorative. It is not a structural support. Do not hang a swing, a beam load, or anything else from it.

Can I return it?

No. It is made for your order. Confirm the profile against the drawing before you buy.

Will this ship to my house?

A few pieces usually ship by parcel. This profile is larger than about 10 to 12 inches, so a large quantity may have to go by LTL freight. Freight needs a verified commercial address a 52-foot trailer can pull into. A house with a business in it does not count. If the carrier decides the address is a residence, a $275 fee is added, and you get a confirmation letter so you can correct the address or pay the extra freight.

What if it arrives damaged?

Inspect it when it is delivered and tell the carrier right away so they can file a claim. Email sales@spectis.us the same day. If we are not told within 24 hours, Spectis cannot qualify the items for a claim.

Need the size checked against the eave? Weekdays, 8 a.m. to 6 p.m. Eastern.

800-986-1250 sales@spectis.us

Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.

View AllClose

Warranty Information

Spectis Moulders Inc. warrants its products against defects in materials and workmanship for a period of five years from date of purchase, to the original end user, when used and installed under recommended conditions. If the product is not painted immediately following installation, the warranty will be for a period of 1 year from date of purchase. Click here for full warranty explanation.
View AllClose

Additional Information

VIEW PDF DRAWING:
View AllClose