2 Step Crown
Two-step crown is the deep, multi-plane cornice used when a single small profile would disappear. Sticks in this filter often run 8 to 21 inches in height. Every piece is cast from high-density polyurethane, factory-primed, and ready to paint.
What size crown to order
Crown fails when it is too small for the wall or too deep for the soffit. Height is the vertical face. Projection is how far it comes off the wall. Both numbers are on the cut sheet for that profile.
| Ceiling or eave | Crown height | Projection | Start with |
|---|---|---|---|
| 8 ft | about 3–5 in | under about 4 in | Decorative crown, base crown, crown nosing |
| 9 ft | about 5–7 in | about 3–6 in | Crown with base, dentil crown, decorative crown |
| 10 ft | about 6–9 in | about 4–8 in | Crown with flat stock, box crown, fossil stone |
| 12 ft or an eave | 9 in and up | often 6–16 in | 2 step crown, boxed crown, dentil crown, concrete finish |
Confirm the cut-sheet height against the actual wall. These ranges are a start, not a substitute for the plate.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
Now: $312.00Was: $398.00 -
Now: $383.00Was: $491.00 -
Now: $366.00Was: $468.00 -
Now: $730.00Was: $938.00 -
Now: $787.00Was: $1,010.00 -
Now: $174.00Was: $223.00 -
Now: $588.00Was: $752.00 -
Now: $754.00Was: $967.00 -
Now: $146.00Was: $186.00 -
Now: $409.00Was: $525.00 -
Now: $127.00Was: $161.00 -
MD1312 Spectis Crown Molding Trim 4 5/8"P x 7 1/2"H x 12'L
Now: $168.00Was: $213.00MD1312 moulding, 4 5/8 in projection. High density polyurethane, made for this order. 4 5/8 in off the wall and 7 1/2 in tall. Confirm it against the wall before you check out. Made-to-oNow: $168.00Was: $213.00 -
MD1357 Spectis Crown Molding Trim 7 1/2"P x 4"H x 144"L
Now: $378.00Was: $485.00MD1357 moulding, 7 1/2 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 7 1/2 in off the wall and 4 in tall. The photo shows the idea. The drNow: $378.00Was: $485.00 -
Now: $272.00Was: $347.00 -
Now: $333.00Was: $426.00 -
Now: $272.00Was: $347.00 -
Now: $433.00Was: $557.00 -
Now: $251.00Was: $320.00 -
MD1467 Spectis Crown Molding Trim 2 11/16"P x 5 1/2"H x 144"L
Now: $145.00Was: $175.00MD1467 moulding, 2 11/16 in projection. The same urethane used inside and outside, cut and nailed like wood. 2 11/16 in off the wall and 5 1/2 in tall. If the soffit isNow: $145.00Was: $175.00 -
Now: $358.00Was: $453.00 -
MD1490 Spectis Crown Molding Trim 7 3/8"P x 7 3/8"H x 12'L
Now: $430.00Was: $551.00MD1490 moulding, 7 3/8 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 7 3/8 in off the wall and 7 3/8 in tall. The photo shows the idea. ThNow: $430.00Was: $551.00 -
MD1493 Spectis Crown Molding Trim 2 3/4"P x 4 15/16"H x 12'L
Now: $145.00Was: $184.00MD1493 moulding, 2 3/4 in projection. High density polyurethane, made for this order. 2 3/4 in off the wall and 4 15/16 in tall. Confirm it against the wall before you check out. Made-toNow: $145.00Was: $184.00 -
MD1500 Spectis Crown Molding Trim 12"P x 22"H x 12'L
Now: $897.00Was: $1,154.00MD1500 moulding, 12 in projection. A primed urethane profile. Paint it after it is up. 12 in off the wall and 22 in tall. Write the profile number down if you are matching an existing ruNow: $897.00Was: $1,154.00 -
MD1536 Spectis Molding Wood Grain Trim 10"P x 8 3/8"H x 144"L
Now: $293.00Was: $376.00MD1536WG moulding, 10 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 10 in off the wall and 8 3/8 in tall. The photo shows the idea. The drNow: $293.00Was: $376.00 -
MD1545 Spectis Crown Molding Trim 17"P x 12"H x 144"L
Now: $855.00Was: $1,098.00MD1545 moulding, 17 in projection. The same urethane used inside and outside, cut and nailed like wood. 17 in off the wall and 12 in tall. If the soffit is shallower than the projection,Now: $855.00Was: $1,098.00 -
MD1557 Spectis Crown Molding Trim 7 1/8"P x 8 1/2"H x 12'L
Now: $320.00Was: $410.00MD1557 moulding, 7 1/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 7 1/8 in off the wall and 8 1/2 in tall. If the soffit is shallower than the prNow: $320.00Was: $410.00 -
MD1562 Spectis Crown Molding Trim 10"P x 13"H x 12'L
Now: $522.00Was: $670.00MD1562 moulding, 10 in projection. A primed urethane profile. Paint it after it is up. 10 in off the wall and 13 in tall. Write the profile number down if you are matching an existing ruNow: $522.00Was: $670.00 -
Now: $211.00Was: $272.00 -
Now: $682.00Was: $875.00 -
MD1611 Spectis Crown Molding 11 5/16"P x 14 3/4"H x 144"L
Now: $522.00Was: $670.00MD1611 moulding, 11 5/16 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 11 5/16 in off the wall and 14 3/4 in tall. The photo shows the ideNow: $522.00Was: $670.00 -
MD1658 Spectis Crown Molding Trim 11 7/8"P x 10 3/4"H x 12'L
Now: $611.00Was: $781.00MD1658 moulding, 11 7/8 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 11 7/8 in off the wall and 10 3/4 in tall. The photo shows the idea.Now: $611.00Was: $781.00 -
Now: $432.00Was: $561.00 -
MD1662 Spectis Crown Molding Trim 12 3/4"P x 12 1/8"H x 12'L
Now: $825.00Was: $1,061.00MD1662 moulding, 12 3/4 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 12 3/4 in off the wall and 12 1/8 in tall. The photo shows the idea.Now: $825.00Was: $1,061.00 -
MD1671 Spectis Crown Molding Trim 7"P x 7"H x 144"L
Now: $251.00Was: $320.00MD1671 moulding, 7 in projection. The same urethane used inside and outside, cut and nailed like wood. 7 in off the wall and 7 in tall. If the soffit is shallower than the projection, piNow: $251.00Was: $320.00 -
MD1681 Spectis Crown Molding 17 1/8"P x 22 5/8"H x 12'L
Now: $871.00Was: $1,116.00MD1681 moulding, 17 1/8 in projection. High density polyurethane, made for this order. 17 1/8 in off the wall and 22 5/8 in tall. Confirm it against the wall before you check out. Made-tNow: $871.00Was: $1,116.00 -
MD1691 Spectis Crown Molding Trim 2 3/8"P x 7 1/8"H x 144"L
Now: $221.00Was: $285.00MD1691 moulding, 2 3/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 2 3/8 in off the wall and 7 1/8 in tall. If the soffit is shallower than the prNow: $221.00Was: $285.00 -
MD1705 Spectis Crown Molding Trim 6 3/4"P x 6 1/8"H x 12'L
Now: $233.00Was: $297.00MD1705 moulding, 6 3/4 in projection. High density polyurethane, made for this order. 6 3/4 in off the wall and 6 1/8 in tall. Confirm it against the wall before you check out. Made-to-oNow: $233.00Was: $297.00 -
MD1712 Spectis Crown Molding Trim 6 3/8"P x 12"H x 12'L
Now: $243.00Was: $312.00MD1712 moulding, 6 3/8 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 6 3/8 in off the wall and 12 in tall. The photo shows the idea. The dNow: $243.00Was: $312.00 -
Now: $147.00Was: $188.00 -
MD1729 Spectis Crown Molding Trim 8 1/8"P x 4 5/8"H x 12'L
Now: $237.00Was: $301.00MD1729 moulding, 8 1/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 8 1/8 in off the wall and 4 5/8 in tall. If the soffit is shallower than the prNow: $237.00Was: $301.00 -
Now: $359.00Was: $462.00 -
MD1740 Spectis Crown Molding Trim 15 13/16"P x 6 3/16"H x 12'L
Now: $463.00Was: $593.00MD1740 moulding, 15 13/16 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 15 13/16 in off the wall and 6 3/16 in tall. The photo shows the iNow: $463.00Was: $593.00 -
Now: $357.00Was: $456.00 -
MD1756 Spectis Crown Molding Dentil Trim 11"P x 9 1/2"H x 12'L
Now: $556.00Was: $713.00MD1756 moulding, 11 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 11 in off the wall and 9 1/2 in tall. The photo shows the idea. The drawNow: $556.00Was: $713.00 -
Now: $391.00Was: $499.00 -
MD1774 Spectis Crown Molding Trim 12"P x 12"H x 12'L
Now: $485.00Was: $624.00MD1774 moulding, 12 in projection. A primed urethane profile. Paint it after it is up. 12 in off the wall and 12 in tall. Write the profile number down if you are matching an existing ruNow: $485.00Was: $624.00 -
MD1786 Spectis Crown Molding Trim 20"P x 12"H x 12'L
Now: $757.00Was: $970.00MD1786 moulding, 20 in projection. A primed urethane profile. Paint it after it is up. 20 in off the wall and 12 in tall. Write the profile number down if you are matching an existing ruNow: $757.00Was: $970.00 -
MD1794 Spectis Crown Molding Trim 11 5/16"P x 21 1/4"H x 12'L
Now: $825.00Was: $1,061.00MD1794 moulding, 11 5/16 in projection. A primed urethane profile. Paint it after it is up. 11 5/16 in off the wall and 21 1/4 in tall. Write the profile number down if you are matchingNow: $825.00Was: $1,061.00