White crown moulding where an interior wall meets the ceilingMouldings White scrolled corbel bracket under a porch eaveBlocks & Brackets White round porch columns supporting a covered front porchColumns & Posts Ornate white ceiling medallion above a brass pendant lanternCeiling Treatments Round white gable louver vent in a gray-sided gableLouvers & Gable Vents White porch handrail with turned balusters and a newel postHandrail White pediment and pilaster entrance surround framing a black front doorEntrance & Window Black louvered decorative shutters flanking a double-hung window on light gray sidingShutters Cream stone-look quoins on the corner of a red brick wallAccents Spectis polyurethane arched wall nicheNiches Spectis polyurethane pergola with lattice trellisTrellis & Pergolas Rough-sawn wood-grain textured beam mouldingTextured Mouldings

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • MD1495 Spectis Molding Case Trim 3/4"P x 3 3/8"H x 144"L MD1495 Spectis Molding Case Trim 3/4"P x 3 3/8"H x 144"L
    Choose Options
    Quick view

    MD1495 Spectis Molding Case Trim 3/4"P x 3 3/8"H x 12'L

    Now: $69.00
    Was: $89.00
    MD1495 moulding, 3/4 in projection. The same urethane used inside and outside, cut and nailed like wood. 3/4 in off the wall and 3 3/8 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long stick, in...
    Now: $69.00
    Was: $89.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $69.00
    Was: $89.00
    Subtotal:
    Choose Options
  • MD1494 Spectis Molding Base Shoe 1"P x 1 1/4"H x 144"L MD1494 Spectis Molding Base Shoe 1"P x 1 1/4"H x 144"L
    Choose Options
    Quick view

    MD1494 Spectis Molding Base Shoe 1"P x 1 1/4"H x 12'L

    Now: $53.00
    Was: $65.00
    MD1494 moulding, 1 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 1 in off the wall and 1 1/4 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most cases 12...
    Now: $53.00
    Was: $65.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $53.00
    Was: $65.00
    Subtotal:
    Choose Options
  • MD1493 Spectis Crown Molding Trim 2 3/4"P x 4 15/16"H x 144"L MD1493 Spectis Crown Molding Trim 2 3/4"P x 4 15/16"H x 144"L
    Choose Options
    Quick view

    MD1493 Spectis Crown Molding Trim 2 3/4"P x 4 15/16"H x 12'L

    Now: $145.00
    Was: $184.00
    MD1493 moulding, 2 3/4 in projection. High density polyurethane, made for this order. 2 3/4 in off the wall and 4 15/16 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long...
    Now: $145.00
    Was: $184.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $145.00
    Was: $184.00
    Subtotal:
    Choose Options
  • MD1492 Spectis Molding Base Trim 1 3/4"P x 5 11/16"H x 144"L MD1492 Spectis Molding Base Trim 1 3/4"P x 5 11/16"H x 144"L
    Choose Options
    Quick view

    MD1492 Spectis Molding Base Trim 1 3/4"P x 5 11/16"H x 12'L

    Now: $115.00
    Was: $146.00
    MD1492 moulding, 1 3/4 in projection. A primed urethane profile. Paint it after it is up. 1 3/4 in off the wall and 5 11/16 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $115.00
    Was: $146.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $115.00
    Was: $146.00
    Subtotal:
    Choose Options
  • MD1491 Spectis Molding Base Cap Trim 1 1/4"P x 4 1/2"H x 96"L MD1491 Spectis Molding Base Cap Trim 1 1/4"P x 4 1/2"H x 96"L
    Choose Options
    Quick view

    MD1491 Spectis Molding Base Cap Trim 1 1/4"P x 4 1/2"H x 12'L

    Now: $65.00
    Was: $83.00
    MD1491 moulding, 1 1/4 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 1/4 in off the wall and 4 1/2 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $65.00
    Was: $83.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $65.00
    Was: $83.00
    Subtotal:
    Choose Options
  • MD1490 Spectis Crown Molding Trim 7 3/8"P x 7 3/8"H x 144"L MD1490 Spectis Crown Molding Trim 7 3/8"P x 7 3/8"H x 144"L
    Choose Options
    Quick view

    MD1490 Spectis Crown Molding Trim 7 3/8"P x 7 3/8"H x 12'L

    Now: $430.00
    Was: $551.00
    MD1490 moulding, 7 3/8 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 7 3/8 in off the wall and 7 3/8 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $430.00
    Was: $551.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $430.00
    Was: $551.00
    Subtotal:
    Choose Options
  • MD1489 Spectis Molding Base Cap Trim 2"P x 4"H x 144"L MD1489 Spectis Molding Base Cap Trim 2"P x 4"H x 144"L
    Choose Options
    Quick view

    MD1489 Spectis Molding Base Cap Trim 2"P x 4"H x 12'L

    Now: $108.00
    Was: $139.00
    MD1489 moulding, 2 in projection. High density polyurethane, made for this order. 2 in off the wall and 4 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick, in most...
    Now: $108.00
    Was: $139.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $108.00
    Was: $139.00
    Subtotal:
    Choose Options
  • MD1488 Spectis Molding Base Cap Trim 1"P x 3 1/8"H x 144"L MD1488 Spectis Molding Base Cap Trim 1"P x 3 1/8"H x 144"L
    Choose Options
    Quick view

    MD1488 Spectis Molding Base Cap Trim 1"P x 3 1/8"H x 144"L

    Now: $90.00
    Was: $111.00
    MD1488 moulding, 1 in projection. A primed urethane profile. Paint it after it is up. 1 in off the wall and 3 1/8 in tall. Write the profile number down if you are matching an existing run. 12 ftOne stick is 12 ft. It will not go by UPS or any parcel...
    Now: $90.00
    Was: $111.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $90.00
    Was: $111.00
    Subtotal:
    Choose Options
  • MD1487 Spectis Crown Molding Trim 10 1/4"P x 6 1/4"H x 144"L MD1487 Spectis Crown Molding Trim 10 1/4"P x 6 1/4"H x 144"L
    Choose Options
    Quick view

    MD1487 Spectis Crown Molding Trim 10 1/4"P x 6 1/4"H x 12'L

    Now: $358.00
    Was: $453.00
    MD1487 moulding, 10 1/4 in projection. The same urethane used inside and outside, cut and nailed like wood. 10 1/4 in off the wall and 6 1/4 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $358.00
    Was: $453.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $358.00
    Was: $453.00
    Subtotal:
    Choose Options
  • MD1486 Spectis Molding Base Trim 1 1/16"P x 6"H x 144"L MD1486 Spectis Molding Base Trim 1 1/16"P x 6"H x 144"L
    Choose Options
    Quick view

    MD1486 Spectis Molding Base Trim 1 1/16"P x 6"H x 12'L

    Now: $133.00
    Was: $169.00
    MD1486 moulding, 1 1/16 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 1 1/16 in off the wall and 6 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $133.00
    Was: $169.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $133.00
    Was: $169.00
    Subtotal:
    Choose Options
  • MD1485 Spectis Crown Molding Trim 3 1/8"P x 6 3/16"H x 144"L MD1485 Spectis Crown Molding Trim 3 1/8"P x 6 3/16"H x 144"L
    Choose Options
    Quick view

    MD1485 Spectis Crown Molding Trim 3 1/8"P x 6 3/16"H x 12'L

    Now: $145.00
    Was: $184.00
    MD1485 moulding, 3 1/8 in projection. High density polyurethane, made for this order. 3 1/8 in off the wall and 6 3/16 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick,...
    Now: $145.00
    Was: $184.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $145.00
    Was: $184.00
    Subtotal:
    Choose Options
  • MD1484 Spectis Crown Molding Dentil Trim 36"P x 36"H x 144"L MD1484 Spectis Crown Molding Dentil Trim 36"P x 36"H x 144"L
    Choose Options
    Quick view

    MD1484 Spectis Crown Molding Dentil Trim 36"P x 36"H x 144"L

    Now: $1,859.00
    Was: $2,392.00
    MD1484 moulding, 36 in projection. A primed urethane profile. Paint it after it is up. 36 in off the wall and 36 in tall. Write the profile number down if you are matching an existing run. 12 ftOne stick is 12 ft. It will not go by UPS or any parcel...
    Now: $1,859.00
    Was: $2,392.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $1,859.00
    Was: $2,392.00
    Subtotal:
    Choose Options
  • MD1483 Spectis Molding Base Cap Trim 1 1/8"P x 1 7/16"H x 96"L MD1483 Spectis Molding Base Cap Trim 1 1/8"P x 1 7/16"H x 96"L
    Choose Options
    Quick view

    MD1483 Spectis Molding Base Cap Trim 1 1/8"P x 1 7/16"H x 12'L

    Now: $32.00
    Was: $38.00
    MD1483 moulding, 1 1/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 1/8 in off the wall and 1 7/16 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $32.00
    Was: $38.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $32.00
    Was: $38.00
    Subtotal:
    Choose Options
  • MD1482 Spectis Molding Rail Trim 1 3/16"P x 1 3/4"H x 144"L MD1482 Spectis Molding Rail Trim 1 3/16"P x 1 3/4"H x 144"L
    Choose Options
    Quick view

    MD1482 Spectis Molding Rail Trim 1 3/16"P x 1 3/4"H x 12'L

    Now: $50.00
    Was: $64.00
    MD1482 moulding, 1 3/16 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 1 3/16 in off the wall and 1 3/4 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $50.00
    Was: $64.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $50.00
    Was: $64.00
    Subtotal:
    Choose Options
  • MD1481 Spectis Molding Square Stock Trim 3"P x 3"H x 144"L MD1481 Spectis Molding Square Stock Trim 3"P x 3"H x 144"L
    Choose Options
    Quick view

    MD1481 Spectis Molding Square Stock Trim 3"P x 3"H x 144"L

    Now: $147.00
    Was: $188.00
    MD1481 moulding, 3 in projection. High density polyurethane, made for this order. 3 in off the wall and 3 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 12 ftOne stick is 12 ft. It will not go by UPS...
    Now: $147.00
    Was: $188.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $147.00
    Was: $188.00
    Subtotal:
    Choose Options
  • MD1480 Spectis Molding Half Round Trim 3/8"P x 3/4"H x 96"L MD1480 Spectis Molding Half Round Trim 3/8"P x 3/4"H x 96"L
    Choose Options
    Quick view

    MD1480 Spectis Molding Half Round Trim 3/8"P x 3/4"H x 12'L

    Now: $31.00
    Was: $37.00
    MD1480 moulding, 3/8 in projection. A primed urethane profile. Paint it after it is up. 3/8 in off the wall and 3/4 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12 feet. A...
    Now: $31.00
    Was: $37.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $31.00
    Was: $37.00
    Subtotal:
    Choose Options
  • MD1479 Spectis Molding Base Cap Trim 3"P x 6"H x 144"L MD1479 Spectis Molding Base Cap Trim 3"P x 6"H x 144"L
    Choose Options
    Quick view

    MD1479 Spectis Molding Base Cap Trim 3"P x 6"H x 144"L

    Now: $172.00
    Was: $220.00
    MD1479 moulding, 3 in projection. The same urethane used inside and outside, cut and nailed like wood. 3 in off the wall and 6 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft. It will not go by...
    Now: $172.00
    Was: $220.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $172.00
    Was: $220.00
    Subtotal:
    Choose Options
  • MD1478 Spectis Crown Molding Trim 1 3/4"P x 3 3/8"H x 144"L MD1478 Spectis Crown Molding Trim 1 3/4"P x 3 3/8"H x 144"L
    Choose Options
    Quick view

    MD1478 Spectis Crown Molding Trim 1 3/4"P x 3 3/8"H x 12'L

    Now: $80.00
    Was: $101.00
    MD1478 moulding, 1 3/4 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 1 3/4 in off the wall and 3 3/8 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $80.00
    Was: $101.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $80.00
    Was: $101.00
    Subtotal:
    Choose Options
  • MD1477 Spectis Plant On Trim 1/2"P x 13"H x 144"L MD1477 Spectis Plant On Trim 1/2"P x 13"H x 144"L
    Choose Options
    Quick view

    MD1477 Spectis Plant On Trim 1/2"P x 13"H x 144"L

    Now: $209.00
    Was: $267.00
    MD1477 moulding, 1/2 in projection. High density polyurethane, made for this order. 1/2 in off the wall and 13 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 12 ftOne stick is 12 ft. It will not go...
    Now: $209.00
    Was: $267.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $209.00
    Was: $267.00
    Subtotal:
    Choose Options
  • MD1476 Spectis Molding Base Trim 1 3/8"P x 10 3/4"H x 144"L MD1476 Spectis Molding Base Trim 1 3/8"P x 10 3/4"H x 144"L
    Choose Options
    Quick view

    MD1476 Spectis Molding Base Trim 1 3/8"P x 10 3/4"H x 144"L

    Now: $202.00
    Was: $259.00
    MD1476 moulding, 1 3/8 in projection. A primed urethane profile. Paint it after it is up. 1 3/8 in off the wall and 10 3/4 in tall. Write the profile number down if you are matching an existing run. 12 ftOne stick is 12 ft. It will not go by UPS or any...
    Now: $202.00
    Was: $259.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $202.00
    Was: $259.00
    Subtotal:
    Choose Options
  • MD1475 Spectis Molding Base Trim 1 5/8"P x 14 3/4"H x 144"L MD1475 Spectis Molding Base Trim 1 5/8"P x 14 3/4"H x 144"L
    Choose Options
    Quick view

    MD1475 Spectis Molding Base Trim 1 5/8"P x 14 3/4"H x 144"L

    Now: $299.00
    Was: $386.00
    MD1475 moulding, 1 5/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 5/8 in off the wall and 14 3/4 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft. It...
    Now: $299.00
    Was: $386.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $299.00
    Was: $386.00
    Subtotal:
    Choose Options
  • MD1474 Spectis Molding Crown Trim 4"P x 4 1/2"H x 144"L MD1474 Spectis Molding Crown Trim 4"P x 4 1/2"H x 144"L
    Choose Options
    Quick view

    MD1474 Spectis Molding Crown Trim 4"P x 4 1/2"H x 12'L

    Now: $188.00
    Was: $243.00
    MD1474 moulding, 4 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 4 in off the wall and 4 1/2 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most cases 12...
    Now: $188.00
    Was: $243.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $188.00
    Was: $243.00
    Subtotal:
    Choose Options
  • MD1473 Spectis Molding Base Trim 1 1/8"P x 3 1/4"H x 144"L MD1473 Spectis Molding Base Trim 1 1/8"P x 3 1/4"H x 144"L
    Choose Options
    Quick view

    MD1473 Spectis Molding Base Trim 1 1/8'P x 3 1/4'H x 144'L

    Now: $81.00
    Was: $102.00
    MD1473 moulding, 1 1/8 in projection. High density polyurethane, made for this order. 1 1/8 in off the wall and 3 1/4 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 144 ftOne stick is 144 ft. It will...
    Now: $81.00
    Was: $102.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $81.00
    Was: $102.00
    Subtotal:
    Choose Options
  • MD1472 Spectis Molding Base Cap 1 11/16"P x 1 5/8"H x 144"L MD1472 Spectis Molding Base Cap 1 11/16"P x 1 5/8"H x 144"L
    Choose Options
    Quick view

    MD1472 Spectis Molding Base Cap 1 11/16"P x 1 5/8"H x 12'L

    Now: $68.00
    Was: $88.00
    MD1472 moulding, 1 11/16 in projection. A primed urethane profile. Paint it after it is up. 1 11/16 in off the wall and 1 5/8 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $68.00
    Was: $88.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $68.00
    Was: $88.00
    Subtotal:
    Choose Options
  • MD1471 Spectis Molding Rail Trim 1 7/8"P x 8 3/16"H x 144"L MD1471 Spectis Molding Rail Trim 1 7/8"P x 8 3/16"H x 144"L
    Choose Options
    Quick view

    MD1471 Spectis Molding Rail Trim 1 7/8"P x 8 3/16"H x 144"L

    Now: $202.00
    Was: $259.00
    MD1471 moulding, 1 7/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 7/8 in off the wall and 8 3/16 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft. It...
    Now: $202.00
    Was: $259.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $202.00
    Was: $259.00
    Subtotal:
    Choose Options
  • MD1470 Spectis Brick Molding Trim 1 3/4"P x 2 1/2"H x 144"L MD1470 Spectis Brick Molding Trim 1 3/4"P x 2 1/2"H x 144"L
    Choose Options
    Quick view

    MD1470 Spectis Brick Molding Trim 1 3/4"P x 2 1/2"H x 12'L

    Now: $97.00
    Was: $124.00
    MD1470 moulding, 1 3/4 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 1 3/4 in off the wall and 2 1/2 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $97.00
    Was: $124.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $97.00
    Was: $124.00
    Subtotal:
    Choose Options
  • MD1469 Spectis Brick Molding Trim 2 1/2"P x 3 1/2"H x 144"L MD1469 Spectis Brick Molding Trim 2 1/2"P x 3 1/2"H x 144"L
    Choose Options
    Quick view

    MD1469 Spectis Brick Molding Trim 2 1/2"P x 3 1/2"H x 12'L

    Now: $165.00
    Was: $212.00
    MD1469 moulding, 2 1/2 in projection. High density polyurethane, made for this order. 2 1/2 in off the wall and 3 1/2 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick,...
    Now: $165.00
    Was: $212.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $165.00
    Was: $212.00
    Subtotal:
    Choose Options
  • MD1468 Spectis Molding Base Trim 3 1/4"P x 16 1/4"H x 144"L MD1468 Spectis Molding Base Trim 3 1/4"P x 16 1/4"H x 144"L
    Choose Options
    Quick view

    MD1468 Spectis Molding Base Trim 3 1/4"P x 16 1/4"H x 12'L

    Now: $322.00
    Was: $413.00
    MD1468 moulding, 3 1/4 in projection. A primed urethane profile. Paint it after it is up. 3 1/4 in off the wall and 16 1/4 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $322.00
    Was: $413.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $322.00
    Was: $413.00
    Subtotal:
    Choose Options
  • MD1467 Spectis Crown Molding Trim 2 11/16"P x 5 1/2"H x 144"L MD1467 Spectis Crown Molding Trim 2 11/16"P x 5 1/2"H x 144"L
    Choose Options
    Quick view

    MD1467 Spectis Crown Molding Trim 2 11/16"P x 5 1/2"H x 144"L

    Now: $145.00
    Was: $175.00
    MD1467 moulding, 2 11/16 in projection. The same urethane used inside and outside, cut and nailed like wood. 2 11/16 in off the wall and 5 1/2 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft...
    Now: $145.00
    Was: $175.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $145.00
    Was: $175.00
    Subtotal:
    Choose Options
  • MD1466 Spectis Crown Molding Trim 10 1/2"P x 10 1/2"H x 144"L MD1466 Spectis Crown Molding Trim 10 1/2"P x 10 1/2"H x 144"L
    Choose Options
    Quick view

    MD1466 Spectis Crown Molding Trim 10 1/2"P x 10 1/2"H x 12'L

    Now: $288.00
    Was: $370.00
    MD1466 moulding, 10 1/2 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 10 1/2 in off the wall and 10 1/2 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in...
    Now: $288.00
    Was: $370.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $288.00
    Was: $370.00
    Subtotal:
    Choose Options
  • MD1465 Spectis Crown Molding Trim 4 1/4"P x 4 3/4"H x 144"L MD1465 Spectis Crown Molding Trim 4 1/4"P x 4 3/4"H x 144"L
    Choose Options
    Quick view

    MD1465 Spectis Crown Molding Trim 4 1/4"P x 4 3/4"H x 12'L

    Now: $126.00
    Was: $160.00
    MD1465 moulding, 4 1/4 in projection. High density polyurethane, made for this order. 4 1/4 in off the wall and 4 3/4 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick,...
    Now: $126.00
    Was: $160.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $126.00
    Was: $160.00
    Subtotal:
    Choose Options
  • MD1464 Spectis Crown Molding Trim 2 5/8"P x 2 3/4"H x 144"L MD1464 Spectis Crown Molding Trim 2 5/8"P x 2 3/4"H x 144"L
    Choose Options
    Quick view

    MD1464 Spectis Crown Molding Trim 2 5/8"P x 2 3/4"H x 144"L

    Now: $116.00
    Was: $175.00
    MD1464 moulding, 2 5/8 in projection. A primed urethane profile. Paint it after it is up. 2 5/8 in off the wall and 2 3/4 in tall. Write the profile number down if you are matching an existing run. 12 ftOne stick is 12 ft. It will not go by UPS or any...
    Now: $116.00
    Was: $175.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $116.00
    Was: $175.00
    Subtotal:
    Choose Options
  • MD1463 Spectis Crown Molding Trim 3"P x 3"H x 144"L MD1463 Spectis Crown Molding Trim 3"P x 3"H x 144"L
    Choose Options
    Quick view

    MD1463 Spectis Crown Molding Trim 3"P x 3"H x 144"L

    Now: $92.00
    Was: $118.00
    MD1463 moulding, 3 in projection. The same urethane used inside and outside, cut and nailed like wood. 3 in off the wall and 3 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft. It will not go by...
    Now: $92.00
    Was: $118.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $92.00
    Was: $118.00
    Subtotal:
    Choose Options
  • MD1462 Spectis Molding Cap Trim 1 1/4"P x 3 3/8"H x 144"L MD1462 Spectis Molding Cap Trim 1 1/4"P x 3 3/8"H x 144"L
    Choose Options
    Quick view

    MD1462 Spectis Molding Cap Trim 1 1/4"P x 3 3/8"H x 12'L

    Now: $88.00
    Was: $110.00
    MD1462 moulding, 1 1/4 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 1 1/4 in off the wall and 3 3/8 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $88.00
    Was: $110.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $88.00
    Was: $110.00
    Subtotal:
    Choose Options
  • MD1461 Spectis Crown Molding Trim 5 1/2"P x 6 3/8"H x 144"L MD1461 Spectis Crown Molding Trim 5 1/2"P x 6 3/8"H x 144"L
    Choose Options
    Quick view

    MD1461 Spectis Crown Molding Trim 5 1/2"P x 6 3/8"H x 144"L

    Now: $251.00
    Was: $320.00
    MD1461 moulding, 5 1/2 in projection. High density polyurethane, made for this order. 5 1/2 in off the wall and 6 3/8 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 12 ftOne stick is 12 ft. It will...
    Now: $251.00
    Was: $320.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $251.00
    Was: $320.00
    Subtotal:
    Choose Options
  • MD1460 Spectis Crown Molding 12 5/16"P x 18 7/8"H x 144"L MD1460 Spectis Crown Molding 12 5/16"P x 18 7/8"H x 144"L
    Choose Options
    Quick view

    MD1460 Spectis Crown Molding 12 5/16"P x 18 7/8"H x 12'L

    Now: $701.00
    Was: $901.00
    MD1460 moulding, 12 5/16 in projection. A primed urethane profile. Paint it after it is up. 12 5/16 in off the wall and 18 7/8 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases...
    Now: $701.00
    Was: $901.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $701.00
    Was: $901.00
    Subtotal:
    Choose Options
  • MD1459 Spectis Base Cap Trim 2 1/16"P x 5 9/16"H x 144"L MD1459 Spectis Base Cap Trim 2 1/16"P x 5 9/16"H x 144"L
    Choose Options
    Quick view

    MD1459 Spectis Base Cap Trim 2 1/16"P x 5 9/16"H x 12'L

    Now: $128.00
    Was: $162.00
    MD1459 moulding, 2 1/16 in projection. The same urethane used inside and outside, cut and nailed like wood. 2 1/16 in off the wall and 5 9/16 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $128.00
    Was: $162.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $128.00
    Was: $162.00
    Subtotal:
    Choose Options
  • MD1458 Spectis Base Cap Trim 1 7/8"P x 5 1/2"H x 144"L MD1458 Spectis Base Cap Trim 1 7/8"P x 5 1/2"H x 144"L
    Choose Options
    Quick view

    MD1458 Spectis Base Cap Trim 1 7/8"P x 5 1/2"H x 12'L

    Now: $121.00
    Was: $155.00
    MD1458 moulding, 1 7/8 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 1 7/8 in off the wall and 5 1/2 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $121.00
    Was: $155.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $121.00
    Was: $155.00
    Subtotal:
    Choose Options
  • MD1457 Spectis Molding Base Cap Trim 5 3/16"P x 4"H x 144"L MD1457 Spectis Molding Base Cap Trim 5 3/16"P x 4"H x 144"L
    Choose Options
    Quick view

    MD1457 Spectis Molding Base Cap Trim 5 3/16"P x 4"H x 12'L

    Now: $200.00
    Was: $254.00
    MD1457 moulding, 5 3/16 in projection. High density polyurethane, made for this order. 5 3/16 in off the wall and 4 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick, in...
    Now: $200.00
    Was: $254.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $200.00
    Was: $254.00
    Subtotal:
    Choose Options
  • MD1456 Spectis Rail Trim 1 1/16"P x 5 1/2"H x 144"L MD1456 Spectis Rail Trim 1 1/16"P x 5 1/2"H x 144"L
    Choose Options
    Quick view

    MD1456 Spectis Rail Trim 1 1/16"P x 5 1/2"H x 12'L

    Now: $121.00
    Was: $155.00
    MD1456 moulding, 1 1/16 in projection. A primed urethane profile. Paint it after it is up. 1 1/16 in off the wall and 5 1/2 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $121.00
    Was: $155.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $121.00
    Was: $155.00
    Subtotal:
    Choose Options
  • MD1455 Spectis Molding Plant On Trim 1 1/8"P x 7"H x 144"L MD1455 Spectis Molding Plant On Trim 1 1/8"P x 7"H x 144"L
    Choose Options
    Quick view

    MD1455 Spectis Molding Plant On Trim 1 1/8"P x 7"H x 144"L

    Now: $147.00
    Was: $188.00
    MD1455 moulding, 1 1/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 1/8 in off the wall and 7 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft. It will not...
    Now: $147.00
    Was: $188.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $147.00
    Was: $188.00
    Subtotal:
    Choose Options
  • MD1454 Spectis Crown Molding Trim 8 1/2"P x 8 1/2"H x 144"L MD1454 Spectis Crown Molding Trim 8 1/2"P x 8 1/2"H x 144"L
    Choose Options
    Quick view

    MD1454 Spectis Crown Molding Trim 8 1/2"P x 8 1/2"H x 12'L

    Now: $306.00
    Was: $388.00
    MD1454 moulding, 8 1/2 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 8 1/2 in off the wall and 8 1/2 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $306.00
    Was: $388.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $306.00
    Was: $388.00
    Subtotal:
    Choose Options
  • MD1453 Spectis Molding Base Trim 2"P x 6"H x 144"L MD1453 Spectis Molding Base Trim 2"P x 6"H x 144"L
    Choose Options
    Quick view

    MD1453 Spectis Molding Base Trim 2"P x 6"H x 144"L

    Now: $137.00
    Was: $175.00
    MD1453 moulding, 2 in projection. High density polyurethane, made for this order. 2 in off the wall and 6 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 12 ftOne stick is 12 ft. It will not go by UPS...
    Now: $137.00
    Was: $175.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $137.00
    Was: $175.00
    Subtotal:
    Choose Options
  • MD1452 Spectis Molding Base Trim 1 1/2"P x 12"H x 144"L MD1452 Spectis Molding Base Trim 1 1/2"P x 12"H x 144"L
    Choose Options
    Quick view

    MD1452 Spectis Molding Base Trim 1 1/2"P x 12"H x 12'L

    Now: $290.00
    Was: $373.00
    MD1452 moulding, 1 1/2 in projection. A primed urethane profile. Paint it after it is up. 1 1/2 in off the wall and 12 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12 feet...
    Now: $290.00
    Was: $373.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $290.00
    Was: $373.00
    Subtotal:
    Choose Options
  • MD1451 Spectis Crown Molding Trim 12"P x 15"H x 144"L MD1451 Spectis Crown Molding Trim 12"P x 15"H x 144"L
    Choose Options
    Quick view

    MD1451 Spectis Crown Molding Trim 12"P x 15"H x 144"L

    Now: $390.00
    Was: $544.00
    MD1451 moulding, 12 in projection. The same urethane used inside and outside, cut and nailed like wood. 12 in off the wall and 15 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft. It will not...
    Now: $390.00
    Was: $544.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $390.00
    Was: $544.00
    Subtotal:
    Choose Options
  • MD1450 Spectis Plant On Trim 11/16"P x 1 1/2"H x 144"L MD1450 Spectis Plant On Trim 11/16"P x 1 1/2"H x 144"L
    Choose Options
    Quick view

    MD1450 Spectis Plant On Trim 11/16"P x 1 1/2"H x 12'L

    Now: $45.00
    Was: $57.00
    MD1450 moulding, 11/16 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 11/16 in off the wall and 1 1/2 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $45.00
    Was: $57.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $45.00
    Was: $57.00
    Subtotal:
    Choose Options
  • MD1449 Spectis Plant On Trim 13/16"P x 3 3/4"H x 144"L MD1449 Spectis Plant On Trim 13/16"P x 3 3/4"H x 144"L
    Choose Options
    Quick view

    MD1449 Spectis Plant On Trim 13/16"P x 3 3/4"H x 144"L

    Now: $97.00
    Was: $124.00
    MD1449 moulding, 13/16 in projection. High density polyurethane, made for this order. 13/16 in off the wall and 3 3/4 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 12 ftOne stick is 12 ft. It will...
    Now: $97.00
    Was: $124.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $97.00
    Was: $124.00
    Subtotal:
    Choose Options
  • MD1448 Spectis Molding Base Cap Trim 6"P x 12"H x 144"L MD1448 Spectis Molding Base Cap Trim 6"P x 12"H x 144"L
    Choose Options
    Quick view

    MD1448 Spectis Molding Base Cap Trim 6"P x 12"H x 12'L

    Now: $583.00
    Was: $749.00
    MD1448 moulding, 6 in projection. A primed urethane profile. Paint it after it is up. 6 in off the wall and 12 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12 feet. A...
    Now: $583.00
    Was: $749.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $583.00
    Was: $749.00
    Subtotal:
    Choose Options
  • MD1447 Spectis Crown Molding Trim 6"P x 8"H x 144"L MD1447 Spectis Crown Molding Trim 6"P x 8"H x 144"L
    Choose Options
    Quick view

    MD1447 Spectis Crown Molding Trim 6"P x 8"H x 144"L

    Now: $290.00
    Was: $373.00
    MD1447 moulding, 6 in projection. The same urethane used inside and outside, cut and nailed like wood. 6 in off the wall and 8 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft. It will not go by...
    Now: $290.00
    Was: $373.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $290.00
    Was: $373.00
    Subtotal:
    Choose Options
  • MD1446-Straight Spectis Molding Dentil 3"P x 6 15/16"H x 50" MD1446-Straight Spectis Molding Dentil 3"P x 6 15/16"H x 50"
    Choose Options
    Quick view

    MD1446-Straight Spectis Molding Dentil 3"P x 6 15/16"H x 50"

    Now: $45.00
    Was: $57.00
    MD1446 moulding, 3 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 3 in off the wall and 6 15/16 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most cases...
    Now: $45.00
    Was: $57.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $45.00
    Was: $57.00
    Subtotal:
    Choose Options
  • MD1446R-17/12 Pitch Dentil Trim Right 3"P x 6 15/16"H x 48"L MD1446R-17/12 Pitch Dentil Trim Right 3"P x 6 15/16"H x 48"L
    Choose Options
    Quick view

    MD1446R-17/12 Pitch Dentil Trim Right 3"P x 6 15/16"H x 48"L

    Now: $67.00
    Was: $86.00
    MD1446R-17/12 moulding, 3 in projection. High density polyurethane, made for this order. 3 in off the wall and 6 15/16 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 4 ftThe listed length is 4 ft. 3...
    Now: $67.00
    Was: $86.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $67.00
    Was: $86.00
    Subtotal:
    Choose Options
  • MD1446R-10/12 Pitch Dentil Trim Right 3"P x 6 15/16"H x 48"L MD1446R-10/12 Pitch Dentil Trim Right 3"P x 6 15/16"H x 48"L
    Choose Options
    Quick view

    MD1446R-10/12 Pitch Dentil Trim Right 3"P x 6 15/16"H x 12'L

    Now: $67.00
    Was: $86.00
    MD1446R-10/12 moulding, 3 in projection. A primed urethane profile. Paint it after it is up. 3 in off the wall and 6 15/16 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $67.00
    Was: $86.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $67.00
    Was: $86.00
    Subtotal:
    Choose Options
  • MD1446L-17/12 Pitch Dentil Trim Left 3"P x 6 15/16"H x 48"L MD1446L-17/12 Pitch Dentil Trim Left 3"P x 6 15/16"H x 48"L
    Choose Options
    Quick view

    MD1446L-17/12 Pitch Dentil Trim 3"P x 6 15/16"H x 12'L

    Now: $67.00
    Was: $86.00
    MD1446L-17/12 moulding, 3 in projection. The same urethane used inside and outside, cut and nailed like wood. 3 in off the wall and 6 15/16 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $67.00
    Was: $86.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $67.00
    Was: $86.00
    Subtotal:
    Choose Options
  • MD1446L-10/12 Pitch Dentil Trim Left 3"P x 6 15/16"H x 48"L MD1446L-10/12 Pitch Dentil Trim Left 3"P x 6 15/16"H x 48"L
    Choose Options
    Quick view

    MD1446L-10/12 Pitch Dentil Trim Left 3"P x 6 15/16"H x 12'L

    Now: $67.00
    Was: $86.00
    MD1446L-10/12 moulding, 3 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 3 in off the wall and 6 15/16 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $67.00
    Was: $86.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $67.00
    Was: $86.00
    Subtotal:
    Choose Options
  • MD1445 Spectis Molding Base Cap Trim 1 7/8"P x 2 3/8"H x 144"L MD1445 Spectis Molding Base Cap Trim 1 7/8"P x 2 3/8"H x 144"L
    Choose Options
    Quick view

    MD1445 Spectis Molding Base Cap Trim 1 7/8"P x 2 3/8"H x 12'L

    Now: $86.00
    Was: $110.00
    MD1445 moulding, 1 7/8 in projection. High density polyurethane, made for this order. 1 7/8 in off the wall and 2 3/8 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick,...
    Now: $86.00
    Was: $110.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $86.00
    Was: $110.00
    Subtotal:
    Choose Options
  • MD1444 Spectis Molding Base Cap Trim 1 3/8"P x 5"H x 144"L MD1444 Spectis Molding Base Cap Trim 1 3/8"P x 5"H x 144"L
    Choose Options
    Quick view

    MD1444 Spectis Molding Base Cap Trim 1 3/8"P x 5"H x 144"L

    Now: $161.00
    Was: $206.00
    MD1444 moulding, 1 3/8 in projection. A primed urethane profile. Paint it after it is up. 1 3/8 in off the wall and 5 in tall. Write the profile number down if you are matching an existing run. 12 ftOne stick is 12 ft. It will not go by UPS or any...
    Now: $161.00
    Was: $206.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $161.00
    Was: $206.00
    Subtotal:
    Choose Options
  • MD1443CF-5.5 Concrete Finish Flat Stock 1/2"P x 5 1/2"H x 12' MD1443CF Spectis Concrete Finish Flat Stock 1/2"P x 5 1/2"H x 144"L
    Choose Options
    Quick view

    MD1443CF-5.5 Concrete Finish Flat Stock 1/2"P x 5 1/2"H x 12'

    Now: $90.00
    Was: $111.00
    MD1443-5.5CF moulding, 1/2 in projection. The same urethane used inside and outside, cut and nailed like wood. 1/2 in off the wall and 5 1/2 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $90.00
    Was: $111.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $90.00
    Was: $111.00
    Subtotal:
    Choose Options
  • MD1442CF Spectis Concrete Finish Rail 1 11/16"P x 5"H x 144"L MD1442CF Spectis Concrete Finish Rail 1 11/16"P x 5"H x 144"L
    Choose Options
    Quick view

    MD1442CF Spectis Concrete Finish Rail 1 11/16"P x 5"H x 12'L

    Now: $145.00
    Was: $184.00
    MD1442CF moulding, 1 11/16 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 1 11/16 in off the wall and 5 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $145.00
    Was: $184.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $145.00
    Was: $184.00
    Subtotal:
    Choose Options
  • MD1441 Spectis Molding Jamb Stock 1 3/8"P x 8 1/2"H x 87"L MD1441 Spectis Molding Jamb Stock 1 3/8"P x 8 1/2"H x 87"L
    Choose Options
    Quick view

    MD1441 Spectis Molding Jamb Stock 1 3/8"P x 8 1/2"H x 12'L

    Now: $100.00
    Was: $126.00
    MD1441 moulding, 1 3/8 in projection. High density polyurethane, made for this order. 1 3/8 in off the wall and 8 1/2 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick,...
    Now: $100.00
    Was: $126.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $100.00
    Was: $126.00
    Subtotal:
    Choose Options
  • MD1440 Spectis Brick Molding Trim 1 3/8"P x 3 1/2"H x 144"L MD1440 Spectis Brick Molding Trim 1 3/8"P x 3 1/2"H x 144"L
    Choose Options
    Quick view

    MD1440 Spectis Brick Molding Trim 1 3/8"P x 3 1/2"H x 12'L

    Now: $100.00
    Was: $127.00
    MD1440 moulding, 1 3/8 in projection. A primed urethane profile. Paint it after it is up. 1 3/8 in off the wall and 3 1/2 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $100.00
    Was: $127.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $100.00
    Was: $127.00
    Subtotal:
    Choose Options
  • MD1439 Spectis Molding Case Trim 1 5/8"P x 6 3/4"H x 144"L MD1439 Spectis Molding Case Trim 1 5/8"P x 6 3/4"H x 144"L
    Choose Options
    Quick view

    MD1439 Spectis Molding Case Trim 1 5/8"P x 6 3/4"H x 12'L

    Now: $137.00
    Was: $174.00
    MD1439 moulding, 1 5/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 5/8 in off the wall and 6 3/4 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $137.00
    Was: $174.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $137.00
    Was: $174.00
    Subtotal:
    Choose Options
  • MD1438 Spectis Crown Molding Trim 7"P x 8"H x 144"L MD1438 Spectis Crown Molding Trim 7"P x 8"H x 144"L
    Choose Options
    Quick view

    MD1438 Spectis Crown Molding Trim 7"P x 8"H x 12'L

    Now: $249.00
    Was: $319.00
    MD1438 moulding, 7 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 7 in off the wall and 8 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most cases 12 feet...
    Now: $249.00
    Was: $319.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $249.00
    Was: $319.00
    Subtotal:
    Choose Options
  • MD1437 Spectis Crown Molding Trim 8 7/8"P x 9 1/2"H x 144"L MD1437 Spectis Crown Molding Trim 8 7/8"P x 9 1/2"H x 144"L
    Choose Options
    Quick view

    MD1437 Spectis Crown Molding Trim 8 7/8"P x 9 1/2"H x 144"L

    Now: $433.00
    Was: $557.00
    MD1437 moulding, 8 7/8 in projection. High density polyurethane, made for this order. 8 7/8 in off the wall and 9 1/2 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 12 ftOne stick is 12 ft. It will...
    Now: $433.00
    Was: $557.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $433.00
    Was: $557.00
    Subtotal:
    Choose Options
  • MD1436 Spectis Crown Molding Trim 2 1/8"P x 2 1/8"H x 144"L MD1436 Spectis Crown Molding Trim 2 1/8"P x 2 1/8"H x 144"L
    Choose Options
    Quick view

    MD1436 Spectis Crown Molding Trim 2 1/8"P x 2 1/8"H x 12'L

    Now: $98.00
    Was: $125.00
    MD1436 moulding, 2 1/8 in projection. A primed urethane profile. Paint it after it is up. 2 1/8 in off the wall and 2 1/8 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $98.00
    Was: $125.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $98.00
    Was: $125.00
    Subtotal:
    Choose Options
  • MD1435 Spectis Molding Base Trim 1 5/8"P x 14 3/4"H x 144"L MD1435 Spectis Molding Base Trim 1 5/8"P x 14 3/4"H x 144"L
    Choose Options
    Quick view

    MD1435 Spectis Molding Base Trim 1 5/8"P x 14 3/4"H x 12'L

    Now: $315.00
    Was: $404.00
    MD1435 moulding, 1 5/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 5/8 in off the wall and 14 3/4 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $315.00
    Was: $404.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $315.00
    Was: $404.00
    Subtotal:
    Choose Options
  • MD1434 Spectis Crown Molding Trim 10"P x 22 1/4"H x 144"L MD1434 Spectis Crown Molding Trim 10"P x 22 1/4"H x 144"L
    Choose Options
    Quick view

    MD1434 Spectis Crown Molding Trim 10"P x 22 1/4"H x 12'L

    Now: $804.00
    Was: $1,033.00
    MD1434 moulding, 10 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 10 in off the wall and 22 1/4 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most cases...
    Now: $804.00
    Was: $1,033.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $804.00
    Was: $1,033.00
    Subtotal:
    Choose Options
  • MD1433 Spectis Crown Molding Trim 7 3/8"P x 7 3/8"H x 144"L MD1433 Spectis Crown Molding Trim 7 3/8"P x 7 3/8"H x 144"L
    Choose Options
    Quick view

    MD1433 Spectis Crown Molding Trim 7 3/8"P x 7 3/8"H x 12'L

    Now: $323.00
    Was: $414.00
    MD1433 moulding, 7 3/8 in projection. High density polyurethane, made for this order. 7 3/8 in off the wall and 7 3/8 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick,...
    Now: $323.00
    Was: $414.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $323.00
    Was: $414.00
    Subtotal:
    Choose Options
  • MD1432 Spectis Molding Base Cap 3 3/4"P x 8 3/8"H x 144"L MD1432 Spectis Molding Base Cap 3 3/4"P x 8 3/8"H x 144"L
    Choose Options
    Quick view

    MD1432 Spectis Molding Base Cap 3 3/4"P x 8 3/8"H x 12'L

    Now: $249.00
    Was: $317.00
    MD1432 moulding, 3 3/4 in projection. A primed urethane profile. Paint it after it is up. 3 3/4 in off the wall and 8 3/8 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $249.00
    Was: $317.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $249.00
    Was: $317.00
    Subtotal:
    Choose Options
  • MD1431 Spectis Crown Molding Trim 1 7/16"P x 2 3/4"H x 144"L MD1431 Spectis Crown Molding Trim 1 7/16"P x 2 3/4"H x 144"L
    Choose Options
    Quick view

    MD1431 Spectis Crown Molding Trim 1 7/16"P x 2 3/4"H x 12'L

    Now: $68.00
    Was: $87.00
    MD1431 moulding, 1 7/16 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 7/16 in off the wall and 2 3/4 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $68.00
    Was: $87.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $68.00
    Was: $87.00
    Subtotal:
    Choose Options
  • MD1430 Spectis Crown Molding Trim 4 1/2"P x 5 3/8"H x 144"L MD1430 Spectis Crown Molding Trim 4 1/2"P x 5 3/8"H x 144"L
    Choose Options
    Quick view

    MD1430 Spectis Crown Molding Trim 4 1/2"P x 5 3/8"H x 12'L

    Now: $182.00
    Was: $234.00
    MD1430 moulding, 4 1/2 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 4 1/2 in off the wall and 5 3/8 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $182.00
    Was: $234.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $182.00
    Was: $234.00
    Subtotal:
    Choose Options
  • MD1429 Spectis Brick Molding Trim 1 7/8"P x 3 1/2"H x 144"L MD1429 Spectis Brick Molding Trim 1 7/8"P x 3 1/2"H x 144"L
    Choose Options
    Quick view

    MD1429 Spectis Brick Molding Trim 1 7/8"P x 3 1/2"H x 12'L

    Now: $94.00
    Was: $120.00
    MD1429 moulding, 1 7/8 in projection. High density polyurethane, made for this order. 1 7/8 in off the wall and 3 1/2 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick,...
    Now: $94.00
    Was: $120.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $94.00
    Was: $120.00
    Subtotal:
    Choose Options
  • MD1428 Spectis Crown Molding Dentil 8"P x 8 1/8"H x 137"L MD1428 Spectis Crown Molding Dentil 8"P x 8 1/8"H x 137"L
    Choose Options
    Quick view

    MD1428 Spectis Crown Molding Dentil 8"P x 8 1/8"H x 12'L

    Now: $497.00
    Was: $638.00
    MD1428 moulding, 8 in projection. A primed urethane profile. Paint it after it is up. 8 in off the wall and 8 1/8 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12 feet. A...
    Now: $497.00
    Was: $638.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $497.00
    Was: $638.00
    Subtotal:
    Choose Options
  • MD1427 Spectis Crown Molding 1 1/2"P x 1 7/8"H x 144"L MD1427 Spectis Crown Molding 1 1/2"P x 1 7/8"H x 144"L
    Choose Options
    Quick view

    MD1427 Spectis Crown Molding 1 1/2"P x 1 7/8"H x 12'L

    Now: $56.00
    Was: $71.00
    MD1427 moulding, 1 1/2 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 1/2 in off the wall and 1 7/8 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $56.00
    Was: $71.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $56.00
    Was: $71.00
    Subtotal:
    Choose Options
  • MD1426 Spectis Molding Dentil 4 11/16"P x 7 1/4"H x 143"L MD1426 Spectis Molding Dentil 4 11/16"P x 7 1/4"H x 143"L
    Choose Options
    Quick view

    MD1426 Spectis Molding Dentil 4 11/16"P x 7 1/4"H x 12'L

    Now: $272.00
    Was: $347.00
    MD1426 moulding, 4 11/16 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 4 11/16 in off the wall and 7 1/4 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in...
    Now: $272.00
    Was: $347.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $272.00
    Was: $347.00
    Subtotal:
    Choose Options
  • MD1425 Spectis Molding Base Cap 3 7/16"P x 7 1/4"H x 144"L MD1425 Spectis Molding Base Cap 3 7/16"P x 7 1/4"H x 144"L
    Choose Options
    Quick view

    MD1425 Spectis Molding Base Cap 3 7/16"P x 7 1/4"H x 12'L

    Now: $208.00
    Was: $267.00
    MD1425 moulding, 3 7/16 in projection. High density polyurethane, made for this order. 3 7/16 in off the wall and 7 1/4 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long...
    Now: $208.00
    Was: $267.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $208.00
    Was: $267.00
    Subtotal:
    Choose Options
  • MD1423 Spectis Molding Case 1 1/16"P x 2 3/4"H x 144"L MD1423 Spectis Molding Case 1 1/16"P x 2 3/4"H x 144"L
    Choose Options
    Quick view

    MD1423 Spectis Molding Case 1 1/16"P x 2 3/4"H x 144"L

    Now: $78.00
    Was: $100.00
    MD1423 moulding, 1 1/16 in projection. A primed urethane profile. Paint it after it is up. 1 1/16 in off the wall and 2 3/4 in tall. Write the profile number down if you are matching an existing run. 12 ftOne stick is 12 ft. It will not go by UPS or...
    Now: $78.00
    Was: $100.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $78.00
    Was: $100.00
    Subtotal:
    Choose Options
  • MD1422 Spectis Molding Base Trim 2"P x 8 3/4"H x 144"L MD1422 Spectis Molding Base Trim 2"P x 8 3/4"H x 144"L
    Choose Options
    Quick view

    MD1422 Spectis Molding Base Trim 2"P x 8 3/4"H x 144"L

    Now: $147.00
    Was: $188.00
    MD1422 moulding, 2 in projection. The same urethane used inside and outside, cut and nailed like wood. 2 in off the wall and 8 3/4 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft. It will not go...
    Now: $147.00
    Was: $188.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $147.00
    Was: $188.00
    Subtotal:
    Choose Options
  • MD1421 Spectis Molding Dentil Trim 4 1/4"P x 5 7/8"H x 144"L MD1421 Spectis Molding Dentil Trim 4 1/4"P x 5 7/8"H x 144"L
    Choose Options
    Quick view

    MD1421 Spectis Molding Dentil Trim 4 1/4"P x 5 7/8"H x 12'L

    Now: $209.00
    Was: $269.00
    MD1421 moulding, 4 1/4 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 4 1/4 in off the wall and 5 7/8 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most...
    Now: $209.00
    Was: $269.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $209.00
    Was: $269.00
    Subtotal:
    Choose Options
  • MD1420 Spectis Molding Base Cap Trim 5"P x 13 1/8"H x 144"L MD1420 Spectis Molding Base Cap Trim 5"P x 13 1/8"H x 144"L
    Choose Options
    Quick view

    MD1420 Spectis Molding Base Cap Trim 5"P x 13 1/8"H x 12'L

    Now: $408.00
    Was: $525.00
    MD1420 moulding, 5 in projection. High density polyurethane, made for this order. 5 in off the wall and 13 1/8 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick, in most...
    Now: $408.00
    Was: $525.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $408.00
    Was: $525.00
    Subtotal:
    Choose Options
  • MD1419 Spectis Crown Molding 10 1/2"P x 14 1/2"H x 144"L MD1419 Spectis Crown Molding 10 1/2"P x 14 1/2"H x 144"L
    Choose Options
    Quick view

    MD1419 Spectis Crown Molding 10 1/2"P x 14 1/2"H x 144"L

    Now: $369.00
    Was: $474.00
    MD1419 moulding, 10 1/2 in projection. A primed urethane profile. Paint it after it is up. 10 1/2 in off the wall and 14 1/2 in tall. Write the profile number down if you are matching an existing run. 12 ftOne stick is 12 ft. It will not go by UPS or...
    Now: $369.00
    Was: $474.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $369.00
    Was: $474.00
    Subtotal:
    Choose Options
  • MD1418 Spectis Molding Post Beam Trim 3"W x 6"H x 144"L MD1418 Spectis Molding Post Beam Trim 3"W x 6"H x 144"L
    Choose Options
    Quick view

    MD1418 Spectis Molding Post Beam Trim 3"W x 6"H x 144"L

    Now: $290.00
    Was: $373.00
    MD1418 moulding, 3 in projection. The same urethane used inside and outside, cut and nailed like wood. 3 in off the wall and 6 in tall. If the soffit is shallower than the projection, pick a smaller profile. 12 ftOne stick is 12 ft. It will not go by...
    Now: $290.00
    Was: $373.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $290.00
    Was: $373.00
    Subtotal:
    Choose Options
  • MD1417 Spectis Molding Base Cap Trim 3/4"P x 11"H x 72"L MD1417 Spectis Molding Base Cap Trim 3/4"P x 11"H x 72"L
    Choose Options
    Quick view

    MD1417 Spectis Molding Base Cap Trim 3/4"P x 11"H x 12'L

    Now: $103.00
    Was: $132.00
    MD1417 moulding, 3/4 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 3/4 in off the wall and 11 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most cases 12...
    Now: $103.00
    Was: $132.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $103.00
    Was: $132.00
    Subtotal:
    Choose Options
  • MD1416 Spectis Molding Base Cap Trim 3/4"P x 5 1/2"H x 72"L MD1416 Spectis Molding Base Cap Trim 3/4"P x 5 1/2"H x 72"L
    Choose Options
    Quick view

    MD1416 Spectis Molding Base Cap Trim 3/4"P x 5 1/2"H x 72"L

    Now: $114.00
    Was: $144.00
    MD1416 moulding, 3/4 in projection. High density polyurethane, made for this order. 3/4 in off the wall and 5 1/2 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 6 ftThe listed length is 6 ft. 3/4 in...
    Now: $114.00
    Was: $144.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $114.00
    Was: $144.00
    Subtotal:
    Choose Options
  • MD1415 Spectis Crown Molding 9 1/16"P x 4 15/16"H x 144"L MD1415 Spectis Crown Molding 9 1/16"P x 4 15/16"H x 144"L
    Choose Options
    Quick view

    MD1415 Spectis Crown Molding 9 1/16"P x 4 15/16"H x 12'L

    Now: $272.00
    Was: $347.00
    MD1415 moulding, 9 1/16 in projection. A primed urethane profile. Paint it after it is up. 9 1/16 in off the wall and 4 15/16 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $272.00
    Was: $347.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $272.00
    Was: $347.00
    Subtotal:
    Choose Options
  • MD1414 Spectis Molding Dentil Trim 1 3/8"P x 9 1/2"H x 144"L MD1414 Spectis Molding Dentil Trim 1 3/8"P x 9 1/2"H x 144"L
    Choose Options
    Quick view

    MD1414 Spectis Molding Dentil Trim 1 3/8"P x 9 1/2"H x 12'L

    Now: $315.00
    Was: $405.00
    MD1414 moulding, 1 3/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 1 3/8 in off the wall and 9 1/2 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $315.00
    Was: $405.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $315.00
    Was: $405.00
    Subtotal:
    Choose Options
  • MD1413 Spectis Crown Molding Trim 8 1/2"P x 7 1/4"H x 144"L MD1413 Spectis Crown Molding Trim 8 1/2"P x 7 1/4"H x 144"L
    Choose Options
    Quick view

    MD1413 Spectis Crown Molding Trim 8 1/2"P x 7 1/4"H x 144"L

    Now: $333.00
    Was: $426.00
    MD1413 moulding, 8 1/2 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 8 1/2 in off the wall and 7 1/4 in tall. The photo shows the idea. The drawing is the size. 12 ftOne stick is 12 ft. It will not go by...
    Now: $333.00
    Was: $426.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $333.00
    Was: $426.00
    Subtotal:
    Choose Options
  • MD1412B Spectis Crown Molding Dentil 7"P x 14 3/8"H x 144"L MD1412B Spectis Crown Molding Dentil 7"P x 14 3/8"H x 144"L
    Choose Options
    Quick view

    MD1412B Spectis Crown Molding Dentil 7"P x 14 3/8"H x 144"L

    Now: $455.00
    Was: $585.00
    MD1412B moulding, 7 in projection. High density polyurethane, made for this order. 7 in off the wall and 14 3/8 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 12 ftOne stick is 12 ft. It will not go...
    Now: $455.00
    Was: $585.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $455.00
    Was: $585.00
    Subtotal:
    Choose Options
  • MD1412A Spectis Crown Molding Dentil 7"P x 14 3/8"H x 144"L MD1412A Spectis Crown Molding Dentil 7"P x 14 3/8"H x 144"L
    Choose Options
    Quick view

    MD1412A Spectis Crown Molding Dentil 7"P x 14 3/8"H x 12'L

    Now: $631.00
    Was: $813.00
    MD1412A moulding, 7 in projection. A primed urethane profile. Paint it after it is up. 7 in off the wall and 14 3/8 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12 feet. A...
    Now: $631.00
    Was: $813.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $631.00
    Was: $813.00
    Subtotal:
    Choose Options
  • MD1411 Spectis Molding Base Cap 4 5/8"P x 12 3/8"H x 144"L MD1411 Spectis Molding Base Cap 4 5/8"P x 12 3/8"H x 144"L
    Choose Options
    Quick view

    MD1411 Spectis Molding Base Cap 4 5/8"P x 12 3/8"H x 12'L

    Now: $482.00
    Was: $619.00
    MD1411 moulding, 4 5/8 in projection. The same urethane used inside and outside, cut and nailed like wood. 4 5/8 in off the wall and 12 3/8 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long...
    Now: $482.00
    Was: $619.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $482.00
    Was: $619.00
    Subtotal:
    Choose Options
  • MD1410 Spectis Crown Molding Trim 7"P x 16 1/2"H x 144"L MD1410 Spectis Crown Molding Trim 7"P x 16 1/2"H x 144"L
    Choose Options
    Quick view

    MD1410 Spectis Crown Molding Trim 7"P x 16 1/2"H x 12'L

    Now: $397.00
    Was: $511.00
    MD1410 moulding, 7 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 7 in off the wall and 16 1/2 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most cases 12...
    Now: $397.00
    Was: $511.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $397.00
    Was: $511.00
    Subtotal:
    Choose Options
  • MD1409 Spectis Crown Molding Trim 3"P x 3"H x 144"L MD1409 Spectis Crown Molding Trim 3"P x 3"H x 144"L
    Choose Options
    Quick view

    MD1409 Spectis Crown Molding Trim 3"P x 3"H x 12'L

    Now: $137.00
    Was: $174.00
    MD1409 moulding, 3 in projection. High density polyurethane, made for this order. 3 in off the wall and 3 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick, in most...
    Now: $137.00
    Was: $174.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $137.00
    Was: $174.00
    Subtotal:
    Choose Options
  • MD1408 Spectis Molding Dentil Trim 4 1/2"P x 8"H x 144"L MD1408 Spectis Molding Dentil Trim 4 1/2"P x 8"H x 144"L
    Choose Options
    Quick view

    MD1408 Spectis Molding Dentil Trim 4 1/2"P x 8"H x 12'L

    Now: $306.00
    Was: $390.00
    MD1408 moulding, 4 1/2 in projection. A primed urethane profile. Paint it after it is up. 4 1/2 in off the wall and 8 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12 feet. A...
    Now: $306.00
    Was: $390.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $306.00
    Was: $390.00
    Subtotal:
    Choose Options
  • MD1407 Spectis Window Sill Trim 6"P x 16"H x 144"L MD1407 Spectis Window Sill Trim 6"P x 16"H x 144"L
    Choose Options
    Quick view

    MD1407 Spectis Window Sill Trim 6"P x 16"H x 12'L

    Now: $130.00
    Was: $168.00
    MD1407 moulding, 6 in projection. The same urethane used inside and outside, cut and nailed like wood. 6 in off the wall and 16 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long stick, in most...
    Now: $130.00
    Was: $168.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $130.00
    Was: $168.00
    Subtotal:
    Choose Options
  • MD1406 Spectis Molding Base Cap Trim 2"P x 4 1/2"H x 144"L MD1406 Spectis Molding Base Cap Trim 2"P x 4 1/2"H x 144"L
    Choose Options
    Quick view

    MD1406 Spectis Molding Base Cap Trim 2"P x 4 1/2"H x 12'L

    Now: $137.00
    Was: $174.00
    MD1406 moulding, 2 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 2 in off the wall and 4 1/2 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most cases 12...
    Now: $137.00
    Was: $174.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $137.00
    Was: $174.00
    Subtotal:
    Choose Options
  • MD1405 Spectis Molding Base Cap Trim 1 7/8"P x 3"H x 144"L MD1405 Spectis Molding Base Cap Trim 1 7/8"P x 3"H x 144"L
    Choose Options
    Quick view

    MD1405 Spectis Molding Base Cap Trim 1 7/8"P x 3"H x 144"L

    Now: $74.00
    Was: $94.00
    MD1405 moulding, 1 7/8 in projection. High density polyurethane, made for this order. 1 7/8 in off the wall and 3 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. 12 ftOne stick is 12 ft. It will not...
    Now: $74.00
    Was: $94.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $74.00
    Was: $94.00
    Subtotal:
    Choose Options
  • MD1404 Spectis Molding Base Cap Trim 1"P x 6"H x 5' 9"L MD1404 Spectis Molding Base Cap Trim 1"P x 6"H x 5' 9"L
    Choose Options
    Quick view

    MD1404 Spectis Molding Base Cap Trim 1"P x 6"H x 12'L

    Now: $66.00
    Was: $84.00
    MD1404 moulding, 1 in projection. A primed urethane profile. Paint it after it is up. 1 in off the wall and 6 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12 feet. A 12-foot...
    Now: $66.00
    Was: $84.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $66.00
    Was: $84.00
    Subtotal:
    Choose Options
  • MD1403 Spectis Molding Base Cap Trim 4 1/2"P x 12"H x 144"L MD1403 Spectis Molding Base Cap Trim 4 1/2"P x 12"H x 144"L
    Choose Options
    Quick view

    MD1403 Spectis Molding Base Cap Trim 4 1/2"P x 12"H x 12'L

    Now: $323.00
    Was: $414.00
    MD1403 moulding, 4 1/2 in projection. The same urethane used inside and outside, cut and nailed like wood. 4 1/2 in off the wall and 12 in tall. If the soffit is shallower than the projection, pick a smaller profile. A long stickSold as a long stick,...
    Now: $323.00
    Was: $414.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $323.00
    Was: $414.00
    Subtotal:
    Choose Options
  • MD1402 Spectis Crown Molding 7"P x 13"H x 144"L MD1402 Spectis Crown Molding 7"P x 13"H x 144"L
    Choose Options
    Quick view

    MD1402 Spectis Crown Molding 7"P x 13"H x 12'L

    Now: $344.00
    Was: $439.00
    MD1402 moulding, 7 in projection. Poured for your order in high density polyurethane. It is not a stocked piece. 7 in off the wall and 13 in tall. The photo shows the idea. The drawing is the size. A long stickSold as a long stick, in most cases 12...
    Now: $344.00
    Was: $439.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $344.00
    Was: $439.00
    Subtotal:
    Choose Options
  • MD1401 Spectis Crown Molding 6 7/8"P x 6 1/8"H x 139 1/2"L
    Choose Options
    Quick view

    MD1401 Spectis Crown Molding 6 7/8"P x 6 1/8"H x 12'L

    Now: $218.00
    Was: $280.00
    MD1401 moulding, 6 7/8 in projection. High density polyurethane, made for this order. 6 7/8 in off the wall and 6 1/8 in tall. Confirm it against the wall before you check out. Made-to-order pieces are not returnable. A long stickSold as a long stick,...
    Now: $218.00
    Was: $280.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $218.00
    Was: $280.00
    Subtotal:
    Choose Options
  • MD1400 Spectis Crown Molding Trim 4 1/4"P x 6 1/4"H x 144"L MD1400 Spectis Crown Molding Trim 4 1/4"P x 6 1/4"H x 144"L
    Choose Options
    Quick view

    MD1400 Spectis Crown Molding Trim 4 1/4"P x 6 1/4"H x 12'L

    Now: $235.00
    Was: $301.00
    MD1400 moulding, 4 1/4 in projection. A primed urethane profile. Paint it after it is up. 4 1/4 in off the wall and 6 1/4 in tall. Write the profile number down if you are matching an existing run. A long stickSold as a long stick, in most cases 12...
    Now: $235.00
    Was: $301.00
    Choose Options Quick view
    Qty in Cart: 0
    Quantity:
    Price:
    Now: $235.00
    Was: $301.00
    Subtotal:
    Choose Options
  • Total: items /

Adding your products to cart

View Cart Continue Shopping