Blog

DECO FLEX MOULDING INSTALLATION INSTRUCTIONS (INDOOR USE ONLY!) Spectis Moulders Deco Flex is installed by using a combination of solvent based contact cement and ADH100 Adhesive, applying the contact cement near the outer edges of the ceiling/wall interfaces, and the ADH100 adhesive in the interior contact areas. The use of the contact cement allows sufficient time to pass for the ADH100 adhesive to cure and take over bonding control. Deco Flex Moulding (Indoors Use Only!) Spectis Mou …

IRON FLEX MOULDING INSTALLATION (INTERIOR/EXTERIOR USE) Spectis Moulders’ Iron Flex is installed using methods similar to those used to install Spectis’ Standard product.  Iron Flex can be installed using the following procedure: 1. Spectis Iron Flex can be installed over almost any clean interior or exterior surface. It should not be installed over wallpaper as the paper may separate or the adhesive may stain the wallpaper.  2. Moulding that has been stored in “hot&r …