Handrail
Handrail
Spectis handrail parts are factory primed polyurethane balusters and rail. They will not rot if installed properly, and they are made to order.
What handrail parts are for
A handrail run is a top rail, a bottom rail, and balusters between them. The baluster height on the product is the spindle height, not the whole stair height.
How to measure
Measure the length of the rail in feet for the top and bottom rail. For balusters, decide the spacing you want, then count how many fit that length. Match the baluster height to the opening between the rails. If you are not sure of the spacing, call with the rail length and the height of the opening.
How it is made
These are high density polyurethane. Spectis cuts, nails, and glues like wood, and the same piece is used inside and outside. It ships double primed white, ready to paint or stain. A specialty paint finish can make a primed piece look like wood. Installed correctly, it will not rot, warp, or crack.
How to install
Use PL Premium on every bedding joint and every butt joint. Other adhesives can damage the urethane. Finish nails or screws hold the piece while the adhesive cures. Adhesive, nails, and finish are sold separately. If the product or the installation steps are changed, that is on the installer.
How long it takes
Pieces are made for the order, so they are not returnable. The order goes to the Spectis plant in Manitoba the same day. Most orders ship in 2 to 3 weeks. Larger orders can take up to 4 weeks. Confirm the SKU, the size, and the quantity before you buy.
Shipping a long piece
Anything over 72 inches ships by freight. A 12 foot piece ships in a wooden crate. On a smaller order we can cut a long piece in half. The shipping prices on the site are for a commercial address. A residence costs more after checkout. Call 800-986-1250 before a large order. Shipping is often lower, and on some orders it is free.
Use PL Premium on every joint. Pieces over 7 feet ship by freight. Shop handrail systems or call 800-986-1250.