BAL2000-25EXT35 Spectis Polyurethane Baluster — 35″ H × 4½″ Square
- SKU:
- BAL2000-25EXT35
- MPN:
- BAL 2000-25EXT35
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date
- Width:
- 4.50 (in)
- Height:
- 4.50 (in)
- Depth:
- 35.00 (in)
- Shipping:
- Calculated at Checkout
Description
BAL2000-25EXT35 Spectis Polyurethane Baluster
BAL2000-25EXT35 is a 35″-high polyurethane baluster with a turned profile and square ends. Its 4½″ square ends pair with the compatible rails listed below. Factory-primed white and made to order, it is ready for finishing to suit your project.
Rails that fit BAL2000-25EXT35
The product card identifies RAL 2119, RAL 2105, RAL 2100. Choose the matching top and bottom rail for your system.
RAL 2119
RAL 2105
RAL 2100
Check the fit
The 35″ body height excludes the PVC pins that seat into the rails. Add the rail dimensions when planning your assembled system.
Top block height: 8½″. Bottom block height: 8½″. Compare the manufacturer’s drawing before ordering, especially when matching an existing installation.
Installation & finishing
- Follow the Spectis instructions for the selected baluster and rail assembly.
- Use PL Premium adhesive (PLP100) on every bedding and butt joint, with the specified fasteners.
- Finish the primed surface and paint promptly after installation.
BAL2000-25EXT35 at a glance
Profile illustration. Check the drawing for exact dimensions and end-block lengths.
- Model
- BAL2000-25EXT35
- Material
- High-density polyurethane
- Height
- 35″ excluding PVC mounting pins
- Square ends
- 4½″
- Rails
- RAL 2119, RAL 2105, RAL 2100
- Production
- Made to order
Plan your order & delivery
Made for your project
Confirm the model, dimensions, rail pairing and quantity. Made-to-order products cannot be returned.
Parcel or freight
Individual balusters typically ship by UPS. Long rails and complete systems ship by LTL freight.
Check the delivery address
Freight requires a verified commercial address with access for a 52-foot trailer. A home business is residential. A $275 residential fee applies if the carrier classifies the address as residential.
Allow time for production
Typically 2–3 weeks from the order date. Contact Spectis to confirm timing for your project.
Drawings & resources
BAL2000-25EXT35 FAQs
What is BAL2000-25EXT35 made of?
High-density polyurethane. This Spectis baluster arrives primed white and ready for paint.
What does the listed height include?
The 35″ measurement is the baluster body height, excluding the projecting PVC mounting pins. The pins seat into holes in the rails. The assembled railing height also depends on your top rail, bottom rail and installation.
Which rails fit this baluster?
The product card lists RAL 2119, RAL 2105, RAL 2100. Use the “Rails that fit” links above to select the corresponding top and bottom rails. Confirm the full assembly before ordering.
What are the top and bottom block dimensions?
The square ends are 4½″ wide. The top square section is 8½″ high and the bottom square section is 8½″ high. These are the A and B dimensions in the manufacturer’s catalog.
What does EXT mean?
EXT identifies an extended baluster. For BAL2000-25EXT35, the catalog specifies 8½″ top and 8½″ bottom square sections and a 35″ body height. Extension details vary by model; check the drawing rather than assuming which end is extended.
How should I plan the spacing?
The manufacturer lists a maximum repeat of 6 9/16″ for this model. Use the manufacturer’s system drawings and installation instructions to confirm spacing and suitability for your project. Have your installer verify the applicable guard requirements; baluster height alone does not establish the finished guard height.
Does it need painting?
Yes. The factory-white primer is ready for finishing. Follow Spectis finishing instructions and paint promptly after installation.
Which adhesive should I use?
Use PL Premium (PLP100) on all bedding and butt joints, together with the fasteners and installation method specified by Spectis. Adhesive and fasteners are sold separately.
How does it ship?
A baluster ordered on its own typically ships by UPS. Long rails and complete systems ship by LTL freight. Freight requires a verified commercial address with access for a 52-foot trailer; a home business is considered residential. A $275 residential fee applies if the carrier classifies the address as residential.
When will my order ship?
This product is made to order. The current estimate is typically 2–3 weeks from the order date. Contact Spectis before ordering if your project has a specific deadline.
Can I return it?
Made-to-order products cannot be returned. Confirm the model, dimensions, rail compatibility and quantity before purchasing.
What if my order arrives damaged?
Inspect the shipment at delivery, tell the carrier immediately, and email sales@spectis.us the same day. The shipping policy requires notification within 24 hours to qualify items for a claim.
Need help choosing rails?
Have your measurements and model BAL2000-25EXT35 ready.
Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
