Crown mouldings
Crown moulding, made when you order it.
Twelve feet of primed urethane. It finishes the line where the wall meets the ceiling, inside or outside.
Pick it in one pass
Measure projection and height on the old piece. Search those two numbers, or call 800-986-1250 with a photo. Do not guess the profile from a room picture.
A low ceiling wants a smaller projection. A tall wall can take a taller face. The spec sheet is the size. Count the walls, divide the total feet by 12, and round up. Add one stick for corners and a bad cut.
The same urethane is used in both. Installed correctly it will not rot, warp, or crack. It ships primed, not stained. A specialty paint finish is what makes it read as wood.
PL Premium on every bedding joint and every butt joint. Other adhesives can damage the urethane. Nails or screws only hold it while the adhesive cures. Adhesive, nails, and finish are sold separately.
Before you check out
A 12 foot stick does not ship UPS
Anything over 72 inches goes by freight, in a wooden crate. Site shipping prices are for a commercial address. A residence costs more after checkout. On a smaller order we can cut the stick in half. Call before a large order. Shipping is often lower, and on some orders it is free.
It is not returnable
More than 6,000 profiles, made for the order, not stocked. Confirm the SKU, projection, height, and quantity. The order goes to the Spectis plant in Manitoba the same day.
You are buying from the USA distributor
The card statement says Veritas Products. There is no stocking dealer. Weekdays 8 a.m. to 6 p.m. Eastern, 800-986-1250, sales@spectis.us.
Shop by size
Projection is how far the crown comes off the wall. Height is how far it comes down the wall. Measure those two on the piece you are matching, then open the bin that contains the number. 244 crowns with both sizes on the listing are in these bins. If a profile is missing, the listing did not print both numbers. Call 800-986-1250 with the two sizes.
Projection
Height
Start with a profile people already buy






Need the profile matched? Call 800-986-1250.
Shop all mouldings