CM1221 Ornate Oblong Urethane Ceiling Medallion 12" x 21" Nominal
- SKU:
- CM1221
- MPN:
- CM1221
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date
- Width:
- 12.00 (in)
- Height:
- 21.00 (in)
- Depth:
- 1.00 (in)
- Shipping:
- Calculated at Checkout
Description
CM1221 Ornate Oblong Urethane Ceiling Medallion
Frame a ceiling focal point with the CM1221, an ornate oblong medallion featuring recessed, spoon-like radial flutes around a central rosette, scrolling relief and pointed leaf ends. Made from high-density polyurethane (HDP), this decorative ceiling accent arrives double primed for a painted finish that complements your room.
CM1221 product illustration. Confirm dimensions and profile against the manufacturer’s drawing before ordering.
CM1221 at a glance
- Model
- CM1221
- Style
- Ornate oblong profile with recessed radial fluting, scrolls and leaf details
- Catalog size
- 12″ × 21″ nominal
- Drawing dimensions
- 12″ × 20⅝″ overall; 1¾″ projection
- Material
- High-density polyurethane (HDP)
- Finish
- Double primed; ready for final painting
- Center
- Decorative solid center shown in the catalog and drawing; no center-hole size is specified
- Production
- Made to order
Decorative detail for a ceiling focal point
The elongated outline gives CM1221 a different presence from a simple round ceiling medallion. Its radiating center and raised scrollwork suit traditional interiors, dining rooms, entries and decorative ceiling compositions.
When planning this medallion around a chandelier or light fixture, have your installer confirm the canopy fit and any required center opening. The medallion is decorative only; the light fixture must have its own independent support.
Check the size before ordering
The catalog lists CM1221 as 12″ × 21″. The manufacturer’s drawing shows 12″ × 20⅝″ with a 1¾″ projection. Use the drawing when checking clearances or matching an existing piece, and confirm any critical fit with Spectis before placing your order.
Installation & finishing
- Follow Spectis installation instructions and fasten to a suitable, solid ceiling substrate.
- Use the specified adhesive on all bedding and butt joints. See PL Premium adhesive (PLP100) and confirm the installation requirements for your project.
- The factory-applied primer is the base for your finish coat. Spectis recommends final finishing after installation for a consistent appearance.
- Confirm fixture clearances and mounting arrangements before installation.
Plan your order & delivery
Made for your order
This product is made to order and cannot be returned. Confirm the model, profile and dimensions before purchasing.
Typical lead time
Typically ships within 2–3 weeks from the order date. Orders are sent to the Spectis plant in Manitoba the same day. Contact Spectis to confirm timing if you have a project deadline.
Parcel or freight
A piece under 25 inches typically ships UPS. Any medallion, ring or panel 25 inches or larger in the order ships by LTL freight, which costs more than parcel delivery.
Freight delivery requirements
Freight requires a verified commercial address accessible to a 52-foot trailer. A home business does not qualify. If the carrier classifies the address as residential, a $275 fee is added and a confirmation letter is sent.
At delivery: Inspect the shipment, notify the carrier immediately of damage, and email sales@spectis.us the same day. Notification within 24 hours is required to qualify items for a claim.
CM1221 questions
What is CM1221 made of?
High-density polyurethane (HDP). The medallion ships double primed and ready for final painting.
Is the medallion exactly 21 inches long?
21 inches is the catalog’s nominal size. The manufacturer’s drawing shows an overall length of 20⅝ inches, a width of 12 inches and a projection of 1¾ inches. Confirm critical measurements before ordering.
Does CM1221 have a center hole?
The catalog and drawing show a decorative solid center and do not specify a center-hole dimension. Have your installer confirm any opening required for your fixture before ordering or modifying the piece.
Can it support a chandelier or ceiling fan?
No. This is decorative ceiling trim. Any light fixture or ceiling fan must be independently supported by suitable mounting hardware.
Does it need painting?
Yes. Apply the final finish according to Spectis finishing recommendations. Spectis recommends final finishing after installation for a consistent appearance.
Can I return a made-to-order medallion?
No. Confirm the profile, model and dimensions before purchasing.
Drawings & resources
Need help checking the fit?
Have model CM1221, your ceiling measurements and fixture canopy dimensions ready. Weekdays, 8 a.m.–6 p.m. Eastern.
Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
