FIN114 Flame-Top Urn Finial – 25½″ H × 8¾″ Max. W
- SKU:
- FIN114
- MPN:
- FIN114
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date
- Width:
- 8.75 (in)
- Height:
- 25.00 (in)
- Depth:
- 8.75 (in)
- Shipping:
- Calculated at Checkout
Description
FIN114 Flame-Top Urn Finial
A sculpted flame above an egg-shaped body, molded rings and a round pedestal. Supplied primed white for finish painting.
Dimensions & details
At a glance
- Model
- FIN114
- Body height
- 25½″
- Maximum width
- 8¾″
- Maximum base width
- 8¼″
- Material
- High-density polyurethane
- Finish
- White primer; finish painting required
- Mounting / construction
- PVC mounting stem shown in photo
- Application
- Decorative, non-load-bearing
Size & fit
Maximum width is the widest part of the ornament; it is not necessarily the mounting footprint. Use the separately listed base or shaft size and manufacturer drawing to check fit. Body height excludes projecting mounting connectors where present. The drawing distinguishes the 7½-inch lower contact diameter from the wider 8¼-inch base molding. Maximum body width is 8¾ inches.
Installation & finishing
Installation
Dry-fit the finial and check alignment, support and clearance. Use ADH100 adhesive on bedding and butt joints, together with the manufacturer’s specified anchoring for the mounting surface. Adhesive and separate installation hardware are sold separately. Confirm the connector size and required embedment before preparing the support. These ornaments are decorative and do not carry structural loads. For exterior locations, coordinate joints and weatherproofing with the supporting assembly.
Finishing
Supplied with white primer. Prepare the surface, finish joints and fastener holes, then apply compatible finish paint according to the manufacturer’s coating instructions.
Drawings & resources
Shipping & ordering
Order timing
Typically Ships within 2-3 weeks from Order Date. Ships from Canada; confirm current timing before scheduling installation.
Parcel or freight
Smaller pieces typically ship UPS. Large pieces or combined orders may require LTL freight to a verified commercial address accessible to a 52-foot trailer. A home-based business does not qualify as a commercial delivery location.
Residential freight
If the carrier classifies the address as residential, a $275 fee is added. A confirmation letter allows you to correct the address or arrange the extra freight.
Before you order
These products are made to order and are nonreturnable. Confirm the model, dimensions and installation requirements before purchasing.
Common questions
How do I check the size?
Maximum width is the widest part of the ornament; it is not necessarily the mounting footprint. Use the separately listed base or shaft size and manufacturer drawing to check fit. Body height excludes projecting mounting connectors where present. The drawing distinguishes the 7½-inch lower contact diameter from the wider 8¼-inch base molding. Maximum body width is 8¾ inches.
What does this design look like?
A sculpted flame above an egg-shaped body, molded rings and a round pedestal.
How does it attach?
PVC mounting stem shown in photo. Follow the manufacturer drawing and confirm the mounting detail for your application; a pictured connector does not replace the required supporting structure.
Is it ready to paint?
Supplied with white primer. Prepare the surface, finish joints and fastener holes, then apply compatible finish paint according to the manufacturer’s coating instructions.
Can I return it?
Made-to-order products are nonreturnable. Confirm dimensions and fit before ordering.
Need help selecting a finial?
Send us the model and your installation dimensions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
