K2719 Smooth Tapered Keystone — 5¾″ W × 5¾″ H × 4½″ P
- SKU:
- K2719
- MPN:
- K2719
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date
- Width:
- 5.75 (in)
- Height:
- 5.75 (in)
- Depth:
- 4.50 (in)
- Shipping:
- Calculated at Checkout
Description
K2719 Smooth Tapered Keystone — 5¾" W × 5¾" H
Add a defined center detail to your window or door surround with the Spectis K2719 smooth tapered keystone. This primed high density polyurethane (HDP) accent has a clean, smooth face that narrows toward the base. Coordinate it with MD1158 for the intended trim arrangement.
Decorative Center Accent
A finishing detail for a compatible surround. This keystone is decorative and is not a structural support.
Listed Dimensions
5¾" wide × 5¾" high × 4½" projection
Primed HDP Urethane
Supplied primed and ready for paint. Apply the final finish after installation.
Made to Order
Check dimensions and profile before ordering. Made-to-order products are nonreturnable.
How to Read the Size
Width is measured across the widest part of the face; height is the overall vertical size. Projection is how far the keystone extends from its mounting plane. The opening width is a separate measurement. Check the rear profile as well as the outside dimensions.
K2719 at a Glance
Style: Smooth Tapered KeystoneListed width: 5¾"
Listed height: 5¾"
Listed projection: 4½"
Material: High density polyurethane (HDP)
Finish: Primed, ready to paint
Quantity: One keystone
Matching component: MD1158
See the Face & Side Profile
The product card shows the face design and side profile. Spectis identifies MD1158 as the matching trim or component. Compare the rear profile and installation arrangement before ordering. The two views illustrate one product; this listing is for one keystone.
Complete the Surround
Spectis identifies MD1158 as the matching trim or component. Compare the rear profile and installation arrangement before ordering. Matching components are sold separately.
Installation & Finish
Mark the center of the surround, then dry-fit the keystone and adjacent trim. Follow Spectis installation instructions and use the specified Spectis adhesive / PL Premium on bedding and butt joints. Fasten into suitable backing as directed, fill joints and fastener holes, and apply the final paint finish after installation. Adhesive and fasteners are sold separately.
Shop PL Premium Adhesive ›Shipping
A short piece typically ships UPS.
A piece the carrier will not take as a parcel goes LTL freight to a verified commercial address a 52-foot trailer can pull into. A house with a business in it does not qualify.
If the carrier calls the address a residence, a $275 fee is added, and you get a confirmation letter so you can correct the address or pay the extra freight.
The order goes to the Spectis plant in Manitoba the same day. Shipping from Canada typically takes two to three weeks.
Drawings & Resources
Product Drawing
Review the manufacturer’s face and side views. See the size-check note above before relying on the drawing dimensions.
View K2719 Drawing (PDF) ›
Spectis Catalog
See keystone styles and matching components on printed pages 125–126.
Open Spectis Catalog ›
Works with K2719 — complete the look
Spectis parts made to go with this item, from the Spectis catalog and product drawings.
Each part is sold separately. Confirm profiles and dimensions against the drawings before ordering.
Questions
What is this keystone used for?
K2719 is a decorative center accent for a compatible window or door surround. It does not carry structural loads.
What size is K2719?
Spectis’s current listed size is 5¾ inches wide × 5¾ inches high × 4½ inches projection. The linked manufacturer drawing differs; confirm production dimensions before ordering.
Which trim goes with this keystone?
Spectis identifies MD1158 as the matching trim or component. Compare the rear profile and installation arrangement before ordering.
Is matching trim included?
No. This listing is for one keystone. Surrounding moulding, arches, headers, adhesive and fasteners are sold separately.
Can I return this keystone?
This product is made to order and is nonreturnable. Confirm the dimensions, rear profile and matching trim before ordering.
Not sure this keystone fits the opening? Weekdays, 8 a.m. to 6 p.m. Eastern.
800-986-1250 sales@spectis.usBuilders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
