K2720 Smooth Tapered Keystone — 10″ W × 10¼″ H × 5″ P

(No reviews yet) Write a Review
SKU:
K2720
MPN:
K2720
Condition:
New
Availability:
Typically Ships within 2-3 weeks from Order Date
Width:
10.00 (in)
Height:
10.25 (in)
Depth:
5.00 (in)
Shipping:
Calculated at Checkout
  • K2720 smooth tapered keystone in primed HDP urethane, front and side profile views; 10 inch W x 10¼ inch H x 5 inch P
  • K2720 Spectis Urethane Keystone 5"P X 10 1/4"H X 10"W
  • K2720 Spectis Urethane Keystone
Now: $67.05
Was: $82.74

Sold Out

Frequently bought together:

Description

K2720 Smooth Tapered Keystone — 10" W × 10¼" H

Add a defined center detail to your window or door surround with the Spectis K2720 smooth tapered keystone. This primed high density polyurethane (HDP) accent has a clean, smooth face that narrows toward the base. Coordinate it with MD1336 for the intended trim arrangement.

Decorative Center Accent

A finishing detail for a compatible surround. This keystone is decorative and is not a structural support.

Listed Dimensions

10" wide × 10¼" high × 5" projection

Primed HDP Urethane

Supplied primed and ready for paint. Apply the final finish after installation.

Made to Order

Check dimensions and profile before ordering. Made-to-order products are nonreturnable.

K2720 smooth tapered keystone, front and side profile, 10 inch width by 10¼ inch height

How to Read the Size

Width is measured across the widest part of the face; height is the overall vertical size. Projection is how far the keystone extends from its mounting plane. The opening width is a separate measurement. Check the rear profile as well as the outside dimensions.

K2720 at a Glance

Style: Smooth Tapered Keystone
Listed width: 10"
Listed height: 10¼"
Listed projection: 5"
Material: High density polyurethane (HDP)
Finish: Primed, ready to paint
Quantity: One keystone
Matching component: MD1336
Manufacturer size check: Spectis’s current product listing gives 10" wide × 10¼" high × 5" projection. Its linked PDF shows 8" wide × 10" high × 5" projection. Confirm the production dimensions with us before ordering for a tight fit.

See the Face & Side Profile

The product card shows the face design and side profile. Spectis identifies MD1336 as the matching trim or component. Compare the rear profile and installation arrangement before ordering. The two views illustrate one product; this listing is for one keystone.

Complete the Surround

Spectis identifies MD1336 as the matching trim or component. Compare the rear profile and installation arrangement before ordering. Matching components are sold separately.

MD1336

Matching trim or component
View MD1336 ›

Compare Keystone Styles ›

Installation & Finish

Mark the center of the surround, then dry-fit the keystone and adjacent trim. Follow Spectis installation instructions and use the specified Spectis adhesive / PL Premium on bedding and butt joints. Fasten into suitable backing as directed, fill joints and fastener holes, and apply the final paint finish after installation. Adhesive and fasteners are sold separately.

Shop PL Premium Adhesive ›

Shipping

Usually UPS

A short piece typically ships UPS.

If it will not go parcel

A piece the carrier will not take as a parcel goes LTL freight to a verified commercial address a 52-foot trailer can pull into. A house with a business in it does not qualify.

If they call it a house

If the carrier calls the address a residence, a $275 fee is added, and you get a confirmation letter so you can correct the address or pay the extra freight.

How long

The order goes to the Spectis plant in Manitoba the same day. Shipping from Canada typically takes two to three weeks.

Drawings & Resources

Product Drawing

Review the manufacturer’s face and side views. See the size-check note above before relying on the drawing dimensions.
View K2720 Drawing (PDF) ›

Spectis Catalog

See keystone styles and matching components on printed pages 125–126.
Open Spectis Catalog ›

Works with K2720 — complete the look

Spectis parts made to go with this item, from the Spectis catalog and product drawings.

Each part is sold separately. Confirm profiles and dimensions against the drawings before ordering.

Questions

What is this keystone used for?

K2720 is a decorative center accent for a compatible window or door surround. It does not carry structural loads.

What size is K2720?

Spectis’s current listed size is 10 inches wide × 10¼ inches high × 5 inches projection. The linked manufacturer drawing differs; confirm production dimensions before ordering.

Which trim goes with this keystone?

Spectis identifies MD1336 as the matching trim or component. Compare the rear profile and installation arrangement before ordering.

Is matching trim included?

No. This listing is for one keystone. Surrounding moulding, arches, headers, adhesive and fasteners are sold separately.

Can I return this keystone?

This product is made to order and is nonreturnable. Confirm the dimensions, rear profile and matching trim before ordering.

Not sure this keystone fits the opening? Weekdays, 8 a.m. to 6 p.m. Eastern.

800-986-1250 sales@spectis.us

Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.

View AllClose

Videos

View AllClose

Warranty Information

Spectis Moulders Inc. warrants its products against defects in materials and workmanship for a period of five years from date of purchase, to the original end user, when used and installed under recommended conditions. If the product is not painted immediately following installation, the warranty will be for a period of 1 year from date of purchase. Read the full Spectis warranty explanation.
View AllClose

Related Products

Related Products