MD1046 Three-Step Base Trim — 3″P x 19″H x 12′L
- SKU:
- MD1046
- MPN:
- MD1046
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date and must be shipped to a COMMERCIAL BUSINESS ADDRESS.
- Width:
- 144.00 (in)
- Height:
- 19.00 (in)
- Depth:
- 3.00 (in)
- Shipping:
- Calculated at Checkout
Description
MD1046 Three-Step Base Trim
MD1046 three-step base trim uses three plain, square-edged tiers to create a tall architectural base detail. Its overall height is 19 inches, with a maximum 3-inch projection at the top tier. The upper, middle and lower sections measure 3, 6 and 10 inches high respectively. Each 12-foot polyurethane length arrives factory-primed white and ready for finishing.
Plan your order & delivery
Made for your project
MD1046 is made to order and cannot be returned. Confirm the profile, dimensions and quantity before purchasing. A sample-cut option is available above.
Ships by freight
The 12-foot lengths travel in a crate by LTL truck freight. Full-length pieces cannot ship by standard parcel service.
Check the delivery address
Use a verified commercial address with access for a 52-foot trailer. A home business is considered residential. If the carrier classifies the address as residential, a $275 fee applies.
Allow time for production
The current estimate is typically 2–3 weeks from the order date. Contact us before ordering if your project has a specific deadline.
Check the fit
Projection measures how far the installed trim extends from the wall. Height measures its vertical rise.
Check the full 3″ maximum projection and 19″ overall height. The CAD shows a 3″-high upper tier, a 6″-high middle tier and a 10″-high lower tier. Their projections step from 3″ to 2″ to 1″; compare adjoining trim and planned returns.
Installation & finishing
- Fit the moulding to a clean, solid mounting surface. Do not install over wallpaper.
- Cut and fasten with standard woodworking tools. Use ADH100 adhesive on every bedding face and butt joint, with the recommended screws or finish nails.
- Finish the factory-primed surface according to Spectis instructions and paint promptly after installation. Fasteners and finish are sold separately.
MD1046 at a glance
- Profile
- Tall base trim with three plain square-edged tiers
- Material
- High-density polyurethane
- Finish
- Factory-primed white
- Use
- Interior and exterior trim with the standard material option
- Curved work
- Deco-Flex is available for interior curved work. Confirm the required curve before ordering.
- Production
- Made to order
- Delivery
- Crated LTL freight for full-length pieces
Drawings & resources
Check the exact profile and dimensions in the drawing. Both PDFs open in a separate tab.
MD1046 FAQs
What is MD1046 made of?
High-density polyurethane (HDP). It can be cut and fastened with standard woodworking tools and resists rot and insect damage.
Can I use it indoors and outdoors?
Standard MD1046 is suitable for interior and exterior trim. Deco-Flex is available for interior curved work. Confirm the required curve before ordering.
Does it need painting?
MD1046 arrives factory-primed and ready for finishing. No extra primer or sanding is normally needed before painting. Follow the Spectis finishing instructions and paint promptly after installation.
Which adhesive should I use?
Use ADH100 adhesive on every bedding face and butt joint, along with the recommended fasteners. Follow the Spectis installation instructions for your trim detail.
How does a 12-foot length ship?
MD1046 ships by LTL freight in a crate. Use a verified commercial address that can accommodate a 52-foot trailer. A home office is still considered residential. Our shipping policy lists a $275 residential fee if the carrier classifies the address as a residence; delivery arrangements should be confirmed before ordering.
When will my order ship?
MD1046 is made to order. The estimated lead time is typically 2–3 weeks from the order date. Confirm timing with Spectis for your project.
Can I return it?
Made-to-order products cannot be returned. Check the dimensions and PDF drawing before purchasing. Use the sample-cut option on the product page if you want to review the profile first.
What if my order arrives damaged?
Inspect the shipment at delivery, report damage to the carrier immediately, and email sales@spectis.us the same day. Our shipping policy requires notification within 24 hours to qualify items for a claim.
Is there a warranty?
The Spectis warranty covers defects in materials and workmanship for five years for the original end user when the product is used and installed under recommended conditions. If it is not painted immediately after installation, the warranty period is one year. Read the full Spectis warranty for terms.
Need help checking the fit?
Have your measurements and part number MD1046 ready.
Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
