MD1062 Stepped Head Trim — Polyurethane — 6″ P × 9″ H × 12′ L
- SKU:
- MD1062
- MPN:
- MD1062
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date and must be shipped to a COMMERCIAL BUSINESS ADDRESS.
- Width:
- 144.00 (in)
- Height:
- 9.00 (in)
- Depth:
- 6.00 (in)
- Shipping:
- Calculated at Checkout
Description
MD1062 Stepped Head Trim
MD1062 stepped head trim combines a broad flat fascia with a projecting rounded top nose, narrow recessed steps and shaped lower bands. Its substantial section measures 6 inches in projection and 9 inches in overall height. Each 12-foot length is made from high-density polyurethane and arrives factory-primed white, ready for finishing. Deco-Flex is available for interior curved work.
Plan your order & delivery
Made for your project
MD1062 is made to order and cannot be returned. Confirm the profile, dimensions and quantity before purchasing. A sample-cut option is available above.
Ships by freight
The 12-foot lengths travel in a crate by LTL truck freight. Full-length pieces cannot ship by standard parcel service.
Check the delivery address
Use a verified commercial address with access for a 52-foot trailer. A home business is considered residential. If the carrier classifies the address as residential, a $275 fee applies.
Allow time for production
The current estimate is typically 2–3 weeks from the order date. Contact us before ordering if your project has a specific deadline.
Check the fit
The CAD shows a 1½″ lower mounting depth beneath the broader 6″ projection. Check the complete 9″ height, stepped returns and available wall or opening clearance. Compare the section drawing with adjoining casing before ordering.
Installation & finishing
- Fit the moulding to a clean, solid mounting surface. Do not install over wallpaper.
- Cut and fasten with standard woodworking tools. Use PL Premium adhesive on every bedding face and butt joint, with the recommended screws or finish nails.
- Finish the factory-primed surface according to Spectis instructions and paint promptly after installation. Fasteners and finish are sold separately.
MD1062 at a glance
- Profile
- Broad flat head-trim fascia with a rounded top nose, recessed steps and shaped lower bands
- Material
- High-density polyurethane
- Finish
- Factory-primed white
- Use
- Interior and exterior trim with the standard material option
- Curved work
- Deco-Flex is available for interior curved work. No Iron-Flex option is offered on this listing; confirm the required curve before ordering.
- Production
- Made to order
- Delivery
- Crated LTL freight for full-length pieces
Drawings & resources
Check the exact profile and dimensions in the drawing. Both PDFs open in a separate tab.
MD1062 FAQs
What is MD1062 and what size is it?
MD1062 is stepped head trim made from high-density polyurethane. It measures 6″ in maximum projection, 9″ in height and 12′ in length. Broad flat head-trim fascia with a rounded top nose, recessed steps and shaped lower bands. Check the PDF drawing for the complete profile.
Can I use it indoors and outdoors?
Standard MD1062 is suitable for interior and exterior trim. Deco-Flex is available for interior curved work; this listing has no Iron-Flex exterior option.
Does it need painting?
MD1062 arrives factory-primed and ready for finishing. No extra primer or sanding is normally needed before painting. Follow the Spectis finishing instructions and paint promptly after installation.
Which adhesive should I use?
Use PL Premium (PLP100) on every bedding face and butt joint, along with the recommended fasteners. Follow the Spectis moulding installation instructions.
How does a 12-foot length ship?
MD1062 ships by LTL freight in a crate. Use a verified commercial address that can accommodate a 52-foot trailer. A home office is still considered residential. Our shipping policy lists a $275 residential fee if the carrier classifies the address as a residence; delivery arrangements should be confirmed before ordering.
When will my order ship?
MD1062 is made to order. The estimated lead time is typically 2–3 weeks from the order date. Confirm timing with Spectis for your project.
Can I return it?
Made-to-order products cannot be returned. Check the dimensions and PDF drawing before purchasing. Use the sample-cut option on the product page if you want to review the profile first.
What if my order arrives damaged?
Inspect the shipment at delivery, report damage to the carrier immediately, and email sales@spectis.us the same day. Our shipping policy requires notification within 24 hours to qualify items for a claim.
Is there a warranty?
The Spectis warranty covers defects in materials and workmanship for five years for the original end user when the product is used and installed under recommended conditions. If it is not painted immediately after installation, the warranty period is one year. Read the full Spectis warranty for terms.
Need help checking the fit?
Have your measurements and part number MD1062 ready.
Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
