MD1073 Beaded Case Trim — Polyurethane — ⅝″ P × 1½″ H × 12′ L
- SKU:
- MD1073
- MPN:
- MD1073
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date and must be shipped to a COMMERCIAL BUSINESS ADDRESS.
- Width:
- 144.00 (in)
- Height:
- 1.50 (in)
- Depth:
- 0.63 (in)
- Shipping:
- Calculated at Checkout
Description
MD1073 Beaded Case Trim
MD1073 beaded case trim combines a narrow, flat casing face finished with a single rounded lower bead. The profile measures ⅝″ in projection by 1½″ in height, with a 12′ length. Each high-density polyurethane piece arrives factory-primed white and ready for finishing.
Plan your order & delivery
Made for your project
MD1073 is made to order and cannot be returned. Confirm the profile, dimensions and quantity before purchasing. A sample-cut option is available above.
Ships by freight
The 12′ pieces ship in a crate by LTL truck freight. Confirm delivery arrangements before ordering.
Check the delivery address
Use a verified commercial address with access for a 52-foot trailer. A home business is considered residential. If the carrier classifies the address as residential, a $275 fee applies.
Allow time for production
The current estimate is typically 2–3 weeks from the order date. Contact us before ordering if your project has a specific deadline.
Check the fit
Allow for the full ⅝″ projection and 1½″ height. Check the drawing against the mounting surface and adjoining trim. Use the 12′ piece length when calculating quantities. The lower bead measures ⅜″.
Installation & finishing
- Fit the moulding to a clean, solid mounting surface. Do not install over wallpaper.
- Cut and fasten with standard woodworking tools. Use PL Premium adhesive on every bedding face and butt joint, with the recommended screws or finish nails.
- Finish the factory-primed surface according to Spectis instructions and paint promptly after installation. Fasteners and finish are sold separately.
MD1073 at a glance
- Profile
- A narrow, flat casing face finished with a single rounded lower bead
- Material
- High-density polyurethane
- Finish
- Factory-primed white
- Use
- Interior and exterior trim with the standard material option
- Curved work
- Deco-Flex for interior use and Iron-Flex for exterior use. Confirm the required curve before ordering.
- Production
- Made to order
- Delivery
- Crated LTL freight for full-length pieces
Drawings & resources
Check the exact profile and dimensions in the drawing. Both PDFs open in a separate tab.
MD1073 FAQs
What is MD1073 and what size is it?
MD1073 is beaded case trim made from high-density polyurethane. It measures ⅝″ in projection, 1½″ in height and 12′ in length. A narrow, flat casing face finished with a single rounded lower bead. See the PDF drawing for the complete section.
Can I use it indoors and outdoors?
Standard MD1073 is suitable for interior and exterior trim in straight runs. Deco-Flex for interior use and Iron-Flex for exterior use. Confirm the required curve before ordering.
Does it need painting?
MD1073 arrives factory-primed and ready for finishing. No extra primer or sanding is normally needed before painting. Follow the Spectis finishing instructions and paint promptly after installation.
Which adhesive should I use?
Use PL Premium (PLP100) on every bedding face and butt joint, along with the recommended fasteners. Follow the Spectis installation instructions for this profile.
How does MD1073 ship?
MD1073 ships by LTL freight in a crate. Freight deliveries require a verified commercial address with access for a 52-foot trailer. A home office is considered residential; a $275 fee applies if the carrier classifies the address as residential.
When will my order ship?
MD1073 is made to order. The estimated lead time is typically 2–3 weeks from the order date. Confirm timing with Spectis for your project.
Can I return it?
Made-to-order products cannot be returned. Check the dimensions and PDF drawing before purchasing. Use the sample-cut option on the product page if you want to review the profile first.
What if my order arrives damaged?
Inspect the shipment at delivery, report damage to the carrier immediately, and email sales@spectis.us the same day. Our shipping policy requires notification within 24 hours to qualify items for a claim.
Is there a warranty?
The Spectis warranty covers defects in materials and workmanship for five years for the original end user when the product is used and installed under recommended conditions. If it is not painted immediately after installation, the warranty period is one year. Read the full Spectis warranty for terms.
Need help checking the fit?
Have your measurements and part number MD1073 ready.
Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
