MD1076 Cove Crown Moulding — Polyurethane — 7⅞″ P × 10″ H × 10′ L
- SKU:
- MD1076
- MPN:
- MD1076
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date and must be shipped to a COMMERCIAL BUSINESS ADDRESS.
- Width:
- 144.00 (in)
- Height:
- 10.00 (in)
- Depth:
- 7.88 (in)
- Shipping:
- Calculated at Checkout
Description
MD1076 Cove Crown Moulding
MD1076 cove crown moulding combines a deep concave cove with a square lower return and angled upper projection. The profile measures 7⅞″ in projection by 10″ in height, with a 10′ length. Each high-density polyurethane piece arrives factory-primed white and ready for finishing.
Plan your order & delivery
Made for your project
MD1076 is made to order and cannot be returned. Confirm the profile, dimensions and quantity before purchasing. A sample-cut option is available above.
Ships by freight
The 10′ pieces ship in a crate by LTL truck freight. Confirm delivery arrangements before ordering.
Check the delivery address
Use a verified commercial address with access for a 52-foot trailer. A home business is considered residential. If the carrier classifies the address as residential, a $275 fee applies.
Allow time for production
The current estimate is typically 2–3 weeks from the order date. Contact us before ordering if your project has a specific deadline.
Check the fit
Allow for the full 7⅞″ projection and 10″ height. Check the drawing against the mounting surface and adjoining trim. Use the 10′ piece length when calculating quantities.
Installation & finishing
- Fit the moulding to a clean, solid mounting surface. Do not install over wallpaper.
- Cut and fasten with standard woodworking tools. Use ADH100 adhesive on every bedding face and butt joint, with the recommended screws or finish nails.
- Finish the factory-primed surface according to Spectis instructions and paint promptly after installation. Fasteners and finish are sold separately.
MD1076 at a glance
- Profile
- A deep concave cove with a square lower return and angled upper projection
- Material
- High-density polyurethane
- Finish
- Factory-primed white
- Use
- Interior and exterior trim with the standard material option
- Curved work
- Deco-Flex is available for interior curved work. Confirm the required curve before ordering.
- Production
- Made to order
- Delivery
- Crated LTL freight for full-length pieces
Drawings & resources
Check the exact profile and dimensions in the drawing. Both PDFs open in a separate tab.
MD1076 FAQs
What is MD1076 and what size is it?
MD1076 is cove crown moulding made from high-density polyurethane. It measures 7⅞″ in projection, 10″ in height and 10′ in length. A deep concave cove with a square lower return and angled upper projection. See the PDF drawing for the complete section.
Can I use it indoors and outdoors?
Standard MD1076 is suitable for interior and exterior trim in straight runs. Deco-Flex is available for interior curved work. Confirm the required curve before ordering.
Does it need painting?
MD1076 arrives factory-primed and ready for finishing. No extra primer or sanding is normally needed before painting. Follow the Spectis finishing instructions and paint promptly after installation.
Which adhesive should I use?
Use ADH100 adhesive on every bedding face and butt joint, along with the recommended fasteners. Follow the Spectis installation instructions for this profile.
How does MD1076 ship?
MD1076 ships by LTL freight in a crate. Freight deliveries require a verified commercial address with access for a 52-foot trailer. A home office is considered residential; a $275 fee applies if the carrier classifies the address as residential.
When will my order ship?
MD1076 is made to order. The estimated lead time is typically 2–3 weeks from the order date. Confirm timing with Spectis for your project.
Can I return it?
Made-to-order products cannot be returned. Check the dimensions and PDF drawing before purchasing. Use the sample-cut option on the product page if you want to review the profile first.
What if my order arrives damaged?
Inspect the shipment at delivery, report damage to the carrier immediately, and email sales@spectis.us the same day. Our shipping policy requires notification within 24 hours to qualify items for a claim.
Is there a warranty?
The Spectis warranty covers defects in materials and workmanship for five years for the original end user when the product is used and installed under recommended conditions. If it is not painted immediately after installation, the warranty period is one year. Read the full Spectis warranty for terms.
Need help checking the fit?
Have your measurements and part number MD1076 ready.
Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
