RP3909 Diagonal Lattice Decorative Panel – 38¾″ W × 33¾″ H
- SKU:
- RP3909
- MPN:
- RP 3909
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date
- Shipping:
- Calculated at Checkout
Description
RP3909 Diagonal Lattice Decorative Panel
An open rectangular diagonal lattice panel with a repeating geometric pattern. Supplied primed white for painting to coordinate with your project.
Dimensions & details
At a glance
- Model
- RP3909
- Overall size
- 38¾″ W × 33¾″ H
- Maximum projection
- 2″
- Material
- High-density polyurethane
- Finish
- White primer; finish painting required
- Design
- Open decorative grille
- Application
- Decorative, non-load-bearing
- Finished face
- Front face; do not assume a finished rear face
Size & fit
Width and height describe the overall panel, not an opening or recessed center. Check the full footprint, projection and surrounding trim clearances before ordering. The manufacturer drawing provides the profile and layout. The individual CAD drawing shows 38¾ inches wide by 33¾ inches high; the previous listing showed 38¾ inches square. Dimensions here follow the drawing. Confirm the current size before ordering.
Installation & finishing
Installation
Dry-fit the panel on a clean, prepared surface, checking that it is level and square. Use ADH100 adhesive on all bedding and butt joints, together with the manufacturer’s specified fasteners and support. Adhesive and fasteners are sold separately. Follow the manufacturer’s installation instructions for the substrate and location. Plan the visible surface behind the openings and provide secure support for the frame. This decorative grille is not a structural railing or safety barrier. For exterior work, coordinate joints, flashing and weatherproofing with the wall assembly.
Finishing
Supplied with white primer. Finish joints and fastener holes, then apply a compatible finish paint following the manufacturer’s preparation and coating instructions.
Drawings & resources
Shipping & ordering
Order timing
Typically Ships within 2-3 weeks from Order Date. Ships from Canada; confirm current timing before scheduling installation.
Parcel or freight
Smaller pieces typically ship UPS. Large pieces or combined orders may require LTL freight to a verified commercial address accessible to a 52-foot trailer. A home-based business does not qualify as a commercial delivery location.
Residential freight
If the carrier classifies the address as residential, a $275 fee is added. A confirmation letter allows you to correct the address or arrange the extra freight.
Before you order
These products are made to order and are nonreturnable. Confirm the model, dimensions and installation requirements before purchasing.
Common questions
Are these overall dimensions?
Width and height describe the overall panel, not an opening or recessed center. Check the full footprint, projection and surrounding trim clearances before ordering. The manufacturer drawing provides the profile and layout. The individual CAD drawing shows 38¾ inches wide by 33¾ inches high; the previous listing showed 38¾ inches square. Dimensions here follow the drawing. Confirm the current size before ordering.
Is the center open or solid?
An open rectangular diagonal lattice panel with a repeating geometric pattern.
Is it structural?
No. This is a decorative panel and must not be used as a load-bearing component or safety barrier.
Is it ready to paint?
Supplied with white primer. Finish joints and fastener holes, then apply a compatible finish paint following the manufacturer’s preparation and coating instructions.
Can I return it?
Made-to-order products are nonreturnable. Confirm dimensions and fit before ordering.
Need help selecting a panel?
Send us the model and your installation dimensions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
