AT1365-68 Moulded Half-Round HDP Urethane Arch Trim - 68" Opening
- SKU:
- AT1365-68
- MPN:
- AT1365-68
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date
- Width:
- 68.00 (in)
- Height:
- 10.00 (in)
- Depth:
- 2.50 (in)
- Shipping:
- $129.00 (Fixed Shipping Cost)
Description
AT1365-68 Moulded Half-Round Arch Trim — 68" Opening
Finish a half-round window or arched doorway with Spectis AT1365-68 moulded arch trim. This primed high density polyurethane (HDP) arch has a wide moulded face with a coved outer edge, a recessed groove and stepped inner details, a 10" trim width and a 2½" projection. Pair it with matching MD1365 straight moulding and an optional K2726 keystone to create a coordinated window or entrance surround.
68" Inside Diameter
Designed for a 68" half-round opening. Confirm the opening shape and dimensions against the product drawing.
Moulded Profile
10" face width and 2½" projection, matching MD1365 profiled moulding.
Primed HDP Urethane
Decorative polyurethane arch trim supplied primed and ready for paint.
Made to Order
Confirm all dimensions before ordering. This made-to-order product is nonreturnable.
How to Read the Size
The 68" dimension is the inside opening diameter, measured between the inner edges at the base. The trim is 10" wide around the curve. Overall dimensions are 88" wide × 44" high × 2½" projection. The 10" trim width is not the overall arch height.
AT1365-68 at a Glance
Style: Moulded half-round archInside diameter: 68"
Trim face width: 10"
Overall width / height: 88" / 44"
Projection: 2½"
Material: High density polyurethane (HDP)
Finish: Primed, ready to paint
Matching trim: MD1365
Matching keystone: K2726
See the Moulding Profile
The profile-detail panel beneath the arch shows the matching MD1365 straight moulding, including its continuous recessed center groove and three inward-stepping edges. This arch has a wide face with a coved outer edge, a recessed groove and stepped inner details. The matching straight moulding continues that profile down the sides of your opening.
Complete the Arch Surround
These matching components are identified in the Spectis catalog. Straight trim continues the arch profile down the sides of the opening; the optional keystone adds a center accent. Matching trim and keystones are sold separately. Check the component drawings and installation arrangement before ordering.
Matching Straight Trim
MD1365 Profiled Casing Trim2½" projection × 10" face width × 144" length. Matches this arch’s moulded profile and trim width.
Shop Matching Trim ›Matching Keystone
K2726 Urethane KeystoneThe catalog-listed keystone for AT1365 arches. Use it as an optional center detail for a coordinated surround.
Shop K2726 Keystone ›Other Profiles for Your 68" Opening
Compare moulding profiles for the same inside opening diameter. Face widths and overall outside dimensions vary.
Installation & Finish
Dry-fit the arch and matching components before fastening. Follow Spectis installation instructions, including the requirement to use Spectis adhesive on all bedding and butt joints. Secure the trim as directed, finish the joints and fastener holes, and paint after installation. This arch is decorative and is not a structural support.
How to Install Arch TrimStep-by-step guide, size chart and matching trimRead the Guide ›Shipping
This arch is more than 48 inches wide overall. Confirm the shipping method and delivery requirements before ordering.
A piece the carrier will not take as a parcel goes LTL freight to a verified commercial address a 52-foot trailer can pull into. A house with a business in it does not qualify.
If the carrier calls the address a residence, a $275 fee is added, and you get a confirmation letter so you can correct the address or pay the extra freight.
The order goes to the Spectis plant in Manitoba the same day. Shipping from Canada typically takes two to three weeks.
Drawings & Resources
Product Drawing
Review the exact opening, overall dimensions and profile before ordering.
View AT1365-68 Drawing (PDF) ›
Spectis Catalog
See arch profiles and matching component information on catalog pages 122–123.
Open Spectis Catalog ›
Works with AT1365-68 — complete the look
Spectis parts made to go with this item, from the Spectis catalog and product drawings.
Each part is sold separately. Confirm profiles and dimensions against the drawings before ordering.
Questions
Which straight trim matches this arch?
MD1365 profiled casing trim matches the 2½-inch projection and 10-inch face width of AT1365-68.
Which keystone goes with AT1365-68?
The Spectis catalog lists K2726 as the matching keystone for the AT1365 arch family. It is sold separately.
Does 68 inches mean the overall width?
No. 68 inches is the inside opening diameter. The overall width is 88 inches: the 10-inch trim on both sides plus the opening. The arch is 44 inches high with a 2½-inch projection.
Are the matching trim and keystone included?
No. This listing is for the arch trim. Matching straight moulding and the optional keystone are purchased separately.
Can I return this arch?
This arch is made to order and is nonreturnable. Confirm the drawing, opening size and profile before ordering.
Not sure this arch trim fits the opening? Weekdays, 8 a.m. to 6 p.m. Eastern.
800-986-1250 sales@spectis.usBuilders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
MD1365 Stepped Casing Trim — Polyurethane — 2½″ P × 10″ H × 12′ L
