CSH1004-104 Moulded Door & Window Crosshead — 104" W x 12 3/4" H
- SKU:
- CSH1004-104
- MPN:
- CSH1004-104
- Condition:
- New
- Availability:
- Typically Ships within 2-3 weeks from Order Date
- Width:
- 104.00 (in)
- Height:
- 12.75 (in)
- Depth:
- 3.50 (in)
- Shipping:
- Calculated at Checkout
Description
CSH1004-104 Moulded Window & Door Crosshead — 104" Base Width
The Spectis CSH1004-104 moulded window & door crosshead adds traditional architectural detail above a door or window. Its moulded profile arrives in double-primed HDP urethane, ready for finish painting.
104" Base Width
104" base width × 12 3/4" height × 3 1/2" projection. Confirm dimensions against the product drawing.
Moulded Window & Door Crosshead
A flat upper cap, shaped cornice, broad smooth face and lower fascia form the CSH1004 profile. The Spectis catalog specifies 3 1/2-inch projection and 12 3/4-inch height, and identifies K2708 as a coordinating keystone, sold separately.
Primed HDP Urethane
Double primed and ready for finish painting after installation.
Made to Order
Confirm all dimensions before ordering. This made-to-order product is nonreturnable.
How to Read the Size
The drawing shows a 104" base width. Review the drawing for the moulding overhang and fitting dimensions. Height is 12 3/4" and projection is 3 1/2". Measure the complete entrance arrangement; product width is not the door-opening width.
CSH1004-104 at a Glance
Style: Moulded Window & Door CrossheadBase Width: 104"
Height: 12 3/4"
Projection: 3 1/2"
Material: High density polyurethane (HDP)
Finish: Double primed, ready to paint
See the Product Profile
A flat upper cap, shaped cornice, broad smooth face and lower fascia form the CSH1004 profile. The Spectis catalog specifies 3 1/2-inch projection and 12 3/4-inch height, and identifies K2708 as a coordinating keystone, sold separately. Review the drawing for front and section views. Additional surround components are sold separately.
Matching Keystone: K2708
The Spectis entrance catalog pairs the CSH1004 profile with the K2708 keystone. Add it as a decorative center accent; check both drawings for placement and fit. Keystone sold separately.
View K2708 Keystone ›Choose Pilasters for Your Entrance
Complete the surround with fluted, single-panel or double-panel pilasters. The Spectis entrance-system chart provides arrangements using 5", 6", 7", 8" and 9" pilaster widths. Measure the opening, including any brickmould that will remain, then select the pilaster width and coordinating crosshead/pediment group from the chart. Confirm pilaster height, projection and component drawings before ordering. Pilasters are sold separately.
Shop Pilaster Styles ›Other Moulded Window & Door Crosshead Sizes
Compare the dimensions and drawings before selecting a different model. Each product has its own proportions and fitting details.
Installation & Finish
Dry-fit the pediment, crosshead and pilasters before fastening. Follow the product drawings and Spectis installation instructions, including the specified adhesive on all bedding and butt joints. Secure each component as directed, finish joints and fastener holes, and paint after installation. These components are decorative trim, not structural supports.
How to Install Pediments and Pilasters ›Shipping
Delivery Method
This piece is over 48 inches on its long side and ships by LTL freight.
Commercial Freight Delivery
LTL freight requires a verified commercial address accessible to a 52-foot trailer. A house with a business in it does not qualify.
Residential Delivery
If the carrier classifies the address as residential, a $275 fee is added. You will receive a confirmation letter to correct the address or pay the additional freight.
Lead Time
Typically ships within 2–3 weeks from the order date. Allow additional time for transit.
Drawings & Resources
Product Drawing
Check exact dimensions and profile before ordering.
View CSH1004-104 Drawing (PDF) ›
Spectis Catalog
Review entrance-system arrangements and pilaster styles.
Open Spectis Catalog ›
Works with CSH1004-104 — complete the look
Spectis parts made to go with this item, from the Spectis catalog and product drawings.
Each part is sold separately. Confirm profiles and dimensions against the drawings before ordering.
Questions
How do I read the dimensions?
The drawing shows a 104 inches base width. Review the drawing for the moulding overhang and fitting dimensions. Height is 12 3/4 inches and projection is 3 1/2 inches. These are product dimensions, not an opening size.
Can I add pilasters?
Yes. Select the pilaster style, width and height for your entrance arrangement. Check the opening, crosshead and pediment drawings together before ordering. Pilasters and other components are sold separately.
What is it made of?
High density polyurethane (HDP urethane), supplied double primed and ready for finish painting. This is decorative trim, not a structural support.
Can I return it?
This product is made to order and is nonreturnable. Confirm its drawing, dimensions and profile before ordering.
What if it arrives damaged?
Inspect it on delivery and notify the carrier right away. Email sales@spectis.us the same day. Damage must be reported within 24 hours to qualify for a claim.
Not sure this crosshead fits the opening? Weekdays, 8 a.m. to 6 p.m. Eastern.
800-986-1250 sales@spectis.usBuilders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.
Videos
View AllClose
Warranty Information
Related Products
Related Products
