CSH1142-78 Crown Door & Window Crosshead — 78" W x 7" H

(No reviews yet) Write a Review
SKU:
CSH1142-78
MPN:
CSH1142-78
Condition:
New
Availability:
Typically Ships within 2-3 weeks from Order Date
Width:
78.00 (in)
Height:
7.00 (in)
Depth:
6.00 (in)
Shipping:
Calculated at Checkout
  • CSH1142-78 crown door and window crosshead, 78 inch base width x 7 inch height x 6 inch projection, primed HDP urethane
  • CSH1142-78 Crosshead for Window/Door
  • CSH1142-78 Crosshead for Window/Door 6"P x 7"H x 78"W
Now: $243.00
Was: $290.00

Sold Out

Frequently bought together:

Description

CSH1142-78 Crown Window & Door Crosshead — 78" Base Width

The Spectis CSH1142-78 crown window & door crosshead adds traditional architectural detail above a door or window. Its moulded profile arrives in double-primed HDP urethane, ready for finish painting.

78" Base Width

78" base width × 7" height × 6" projection. Confirm dimensions against the product drawing.

Crown Window & Door Crosshead

A deep projecting crown with layered curves and a short flat lower fascia forms the CSH1142 profile. The current manufacturer drawing specifies 7-inch height and 6-inch projection. The entrance catalog identifies K2718 as a coordinating keystone, sold separately.

Primed HDP Urethane

Double primed and ready for finish painting after installation.

Made to Order

Confirm all dimensions before ordering. This made-to-order product is nonreturnable.

CSH1142-78 Crown Window & Door Crosshead in primed HDP urethane, 78 inch base width × 7 inch height × 6 inch projection

How to Read the Size

The drawing shows a 78" base width. Review the drawing for the moulding overhang and fitting dimensions. Height is 7" and projection is 6". Measure the complete entrance arrangement; product width is not the door-opening width.

CSH1142-78 at a Glance

Style: Crown Window & Door Crosshead
Base Width: 78"
Height: 7"
Projection: 6"
Material: High density polyurethane (HDP)
Finish: Double primed, ready to paint

See the Product Profile

A deep projecting crown with layered curves and a short flat lower fascia forms the CSH1142 profile. The current manufacturer drawing specifies 7-inch height and 6-inch projection. The entrance catalog identifies K2718 as a coordinating keystone, sold separately. Review the drawing for front and section views. Additional surround components are sold separately.

Matching Keystone: K2718

The Spectis entrance catalog pairs CSH1142 with K2718. Check both drawings for placement and fit. Keystone sold separately.

K2718 matching keystone for CSH1142, sold separatelyView K2718 Keystone ›

Choose Pilasters for Your Entrance

Complete the surround with fluted, single-panel or double-panel pilasters. The Spectis entrance-system chart provides arrangements using 5", 6", 7", 8" and 9" pilaster widths. Measure the opening, including any brickmould that will remain, then select the pilaster width and coordinating crosshead/pediment group from the chart. Confirm pilaster height, projection and component drawings before ordering. Pilasters are sold separately.

Shop Pilaster Styles ›

Other CSH1142 Crosshead Sizes

These sizes share the CSH1142 profile: 7" height and 6" projection. Compare base widths and drawings before ordering.

Other 78" Headers for Doors & Windows

Compare different profiles in the same 78-inch nominal base width. Heights, projections and overhangs vary; check each drawing for your opening.

Installation & Finish

Dry-fit the pediment, crosshead and pilasters before fastening. Follow the product drawings and Spectis installation instructions, including the specified adhesive on all bedding and butt joints. Secure each component as directed, finish joints and fastener holes, and paint after installation. These components are decorative trim, not structural supports.

How to Install Pediments and Pilasters ›

Shipping

Delivery Method

This piece is over 48 inches on its long side and ships by LTL freight.

Commercial Freight Delivery

LTL freight requires a verified commercial address accessible to a 52-foot trailer. A house with a business in it does not qualify.

Residential Delivery

For LTL freight, if the carrier classifies the address as residential, a $275 fee is added. You will receive a confirmation letter to correct the address or pay the additional freight.

Lead Time

Typically ships within 2–3 weeks from the order date. Allow additional time for transit.

Drawings & Resources

Product Drawing

Check exact dimensions and profile before ordering.
View CSH1142-78 Drawing (PDF) ›

Spectis Catalog

Review entrance-system arrangements and pilaster styles.
Open Spectis Catalog ›

Works with CSH1142-78 — complete the look

Spectis parts made to go with this item, from the Spectis catalog and product drawings.

Each part is sold separately. Confirm profiles and dimensions against the drawings before ordering.

Questions

How do I read the dimensions?

The drawing shows a 78 inches base width. Review the drawing for the moulding overhang and fitting dimensions. Height is 7 inches and projection is 6 inches. These are product dimensions, not an opening size.

Can I add pilasters?

Yes. Select the pilaster style, width and height for your entrance arrangement. Check the opening, crosshead and pediment drawings together before ordering. Pilasters and other components are sold separately.

What is it made of?

High density polyurethane (HDP urethane), supplied double primed and ready for finish painting. This is decorative trim, not a structural support.

Can I return it?

This product is made to order and is nonreturnable. Confirm its drawing, dimensions and profile before ordering.

What if it arrives damaged?

Inspect it on delivery and notify the carrier right away. Email sales@spectis.us the same day. Damage must be reported within 24 hours to qualify for a claim.

Not sure this crosshead fits the opening? Weekdays, 8 a.m. to 6 p.m. Eastern.

800-986-1250 sales@spectis.us

Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.

View AllClose

Videos

View AllClose

Warranty Information

Spectis Moulders Inc. warrants its products against defects in materials and workmanship for a period of five years from date of purchase, to the original end user, when used and installed under recommended conditions. If the product is not painted immediately following installation, the warranty will be for a period of 1 year from date of purchase. Read the full Spectis warranty explanation.
View AllClose

Related Products

Related Products