PL690F Fluted Pilaster – 6″ W × 90″ H

(No reviews yet) Write a Review
SKU:
PL690F
MPN:
PL690F
Condition:
New
Availability:
Typically Ships within 2-3 weeks from Order Date
Width:
6.00 (in)
Height:
90.00 (in)
Depth:
2.25 (in)
Shipping:
Calculated at Checkout
  • PL690F Fluted Pilaster – 6″ W × 90″ H – HDP Urethane
  • PL690F Fluted Pilaster – 6″ W × 90″ H – HDP Urethane
  • PL690F Fluted Pilaster from Spectis Urethane 6" x 90"
  • PL690F Fluted Pilasters from Spectis Urethane 6" x 90"
Now: $205.00
Was: $251.00

Sold Out

Frequently bought together:

Description

PL690F Fluted Pilaster

PL690F Fluted Pilaster 6″ W × 90″ H

Four round-ended flutes, a moulded capital and a tall plain plinth create the traditional profile of the PL690F pilaster.

Dimensions & details

Catalog nominal size: 6″ wide × 90″ high × 2¼″ projection. CAD shows a 2⅝″ cap projection and 2½″ base projection. Check the detailed drawing for clearances.

  • High-density polyurethane (HDP urethane).
  • Primed for finish painting.
  • Decorative, non-load-bearing trim.
  • Sold individually.

Complete the surround

Browse other pilaster styles and sizes, and coordinate with decorative pediments or crossheads sized to the opening and pilaster widths.

How to install pediments and pilasters

Factory primed. Paint it after it is up. Vertical trim beside a door or a window. It is decorative. It is not a column, and it does not carry a load.

A pilasterVertical trim beside a door or a window. It is decorative. It is not a column, and it does not carry a load.
Cut the bottomMeasure from the top of the door down to the landing, including any brick mold. Cut the extra off the bottom so the two tops land level.
The plinthIf the plinth block is separate, bed it to the pilaster with ADH100 adhesive and fasten it from the back before the pilaster goes on the wall.
Made for this orderMolded when you order it. Spectis does not keep it on a shelf, and it cannot be returned.

Shipping

This one ships LTL

The long side is over 48 inches, so it ships LTL freight, the same as a long header.

Where it can land

a verified commercial address a 52-foot trailer can pull into. A house with a business in it does not qualify.

If they call it a house

If the carrier calls the address a residence, a $275 fee is added, and you get a confirmation letter so you can correct the address or pay the extra freight.

How long

The order goes to the Spectis plant in Manitoba the same day. Shipping from Canada typically takes two to three weeks.

How it goes up

Bed the pilaster to the wall with ADH100 adhesive and fasten it with corrosion-resistant exterior screws or finish nails into framing. A different adhesive can attack the urethane. Nails, screws, and adhesive are sold separately. Install notes.

Back to entrance and window systems

Spectis Catalogue Volume 8Spectis Catalogue Volume 8

PL690F drawing

Download the PL690F drawing

Build an entrance with PL690F

With 6″ pilasters, C is the opening left between the pair under each crosshead size. Find the row whose C matches your door or window opening, then choose that row’s crosshead or pediment.

Fluted pilasters in other widths: PL590F (5″) · PL790F (7″) · PL890F (8″) · PL990F (9″)

Other 6″ styles: PL690P (single panel) · PL690DP (double panel)

See the full Entrance System Chart

Questions

What is it made of?

High density polyurethane. It ships double primed and ready for latex paint.

Does it carry a load?

No. It is decorative trim. It does not carry the wall, the floor, or the roof.

Which glue?

Use ADH100 adhesive. A different adhesive can attack the urethane. Buy ADH100 adhesive.

Can I return it?

No. It is made for your order. Confirm the profile and the size against the drawing before you buy.

How does it ship?

This piece is over 48 inches on the long side, so it ships LTL freight to a verified commercial address a 52-foot trailer can pull into. If the carrier calls the address a residence, a $275 fee is added, and you get a confirmation letter.

What if it arrives damaged?

Inspect it when it is delivered and tell the carrier right away. Email sales@spectis.us the same day. If we are not told within 24 hours, Spectis cannot qualify the items for a claim.

Not sure this pilaster fits the opening? Weekdays, 8 a.m. to 6 p.m. Eastern.

800-986-1250 sales@spectis.us

Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.

View AllClose

Videos

View AllClose

Warranty Information

Spectis Moulders Inc. warrants its products against defects in materials and workmanship for a period of five years from date of purchase, to the original end user, when used and installed under recommended conditions. If the product is not painted immediately following installation, the warranty will be for a period of 1 year from date of purchase. Read the full Spectis warranty explanation.
View AllClose

Related Products

Related Products