How to Install a Spectis Sunburst

How to Install a Spectis Sunburst

A sunburst is the fan-shaped piece in a gable or over a door or window. It is an accent. It is not a louver unless the catalog plate says the face is open.

Set it in a framed half-round or in the peak, on a flat, finished surface. The diameter on the plate has to match the opening. A sunburst that is smaller than the arch leaves a gap. One that is larger will not sit in the trim.

The part is high-density polyurethane, factory primed, and ready to paint. Use PLP100 on the bedding face. Fasten it while the adhesive sets, fill the holes, then paint.

Sep 30th 2026 Spectis

Recent Posts