How to Install Spectis Trellis
Spectis trellis and pergola parts are high-density polyurethane, factory primed, and ready to paint. They are for a garden wall or an overhead frame.
These parts are decorative millwork. They are not a rated structure. Do not hang a load from a trellis panel, and do not treat a pergola part as the beam that holds a roof.
Fasten the panel to a sound surface. Use PLP100 on bedding faces and butt joints, and screws or nails where the plate calls for them. Paint after the joints are closed. The primer is not the weather coat.
Sep 30th 2026
Recent Posts
-
Spectis Moulding Product Warranty
SPECTIS MOULDERS INC. herein referred to as the "seller", warrants its products against defects in m …Sep 30th 2026 -
Physical Properties of Spectis Products
PHYSICAL PROPERTIES OF SPECTIS MOULDING PRODUCTS DENSITY SPECTIS products are made with high densit …Sep 30th 2026 -
Which Spectis Piece Goes Where: Porch, Gable, Window, Ceiling
Porch. A hollow column wraps a post that already carries the load. A structural column, with a 4-1/2 …Sep 30th 2026