PL1296F Fluted HDP Urethane Pilaster Pair – 13⅞″ x 97″

(No reviews yet) Write a Review
SKU:
PL1296F
MPN:
PL1296F
Condition:
New
Availability:
Typically Ships within 2-3 weeks from Order Date
Width:
13.00 (in)
Height:
97.00 (in)
Depth:
2.50 (in)
Shipping:
Calculated at Checkout
  • PL1296F Fluted HDP Urethane Pilaster Pair – nominal 13⅞″ W x 97″ H
  • PL1296F Fluted Pilasters from Spectis Urethane 13 7/8" x 96"
  • PL1296F Fluted Pilasters from Spectis Urethane 13 7/8" x 96"
Now: $452.00
Was: $558.00

Sold Out

Frequently bought together:

Description

PL1296F Fluted HDP Urethane Pilaster Pair

PL1296F white fluted urethane pilaster with moulded capital and plain plinth

Frame an entrance with the broad proportions of the PL1296F fluted pilaster pair. Seven round-ended flutes, a plain capital face with moulded trim and a rectangular plinth create a traditional door or window surround.

Dimensions & details

  • Catalog nominal width: 13⅞″; overall height: 97″.
  • Catalog nominal projection: 2¼″.
  • Sold as a pair; one pilaster shown.
  • High-density polyurethane (HDP urethane), double primed for finish painting.
  • Decorative, non-load-bearing trim.

Detailed CAD dimensions: the drawing shows a 13¹⁵⁄₁₆″ cap width, 13⅞″ base width and 11¹³⁄₁₆″ shaft width. Cap projection is 2⅜″ and base projection is 2½″; shaft depth is 1⅜″. Overall height is 97″, including a 14″ base section. Check these details for clearance before ordering.

Complete the surround

Coordinate with a decorative pediment or crosshead sized to your opening and pilaster widths. Browse other pilaster sizes and styles.

How to install pediments and pilasters

High density polyurethane, molded for this order. Vertical trim beside a door or a window. It is decorative. It is not a column, and it does not carry a load.

A pilasterVertical trim beside a door or a window. It is decorative. It is not a column, and it does not carry a load.
Cut the bottomMeasure from the top of the door down to the landing, including any brick mold. Cut the extra off the bottom so the two tops land level.
The plinthIf the plinth block is separate, bed it to the pilaster with ADH100 adhesive and fasten it from the back before the pilaster goes on the wall.
Made for this orderMolded when you order it. Spectis does not keep it on a shelf, and it cannot be returned.

Shipping

Usually UPS

A short piece typically ships UPS.

If it will not go parcel

A piece the carrier will not take as a parcel goes LTL freight to a verified commercial address a 52-foot trailer can pull into. A house with a business in it does not qualify.

If they call it a house

If the carrier calls the address a residence, a $275 fee is added, and you get a confirmation letter so you can correct the address or pay the extra freight.

How long

The order goes to the Spectis plant in Manitoba the same day. Shipping from Canada typically takes two to three weeks.

How it goes up

Bed the pilaster to the wall with ADH100 adhesive and fasten it with corrosion-resistant exterior screws or finish nails into framing. A different adhesive can attack the urethane. Nails, screws, and adhesive are sold separately. Install notes.

Back to entrance and window systems

Spectis Catalogue Volume 8Spectis Catalogue Volume 8

PL1296F drawing

Download the PL1296F drawing

Questions

What is it made of?

High density polyurethane. It ships double primed and ready for latex paint.

Does it carry a load?

No. It is decorative trim. It does not carry the wall, the floor, or the roof.

Which glue?

Use ADH100 adhesive. A different adhesive can attack the urethane. Buy ADH100 adhesive.

Can I return it?

No. It is made for your order. Confirm the profile and the size against the drawing before you buy.

How does it ship?

A short piece typically ships UPS. If the carrier will not take it as a parcel, it goes LTL freight to a verified commercial address a 52-foot trailer can pull into. If the carrier calls the address a residence, a $275 fee is added.

What if it arrives damaged?

Inspect it when it is delivered and tell the carrier right away. Email sales@spectis.us the same day. If we are not told within 24 hours, Spectis cannot qualify the items for a claim.

Not sure this pilaster fits the opening? Weekdays, 8 a.m. to 6 p.m. Eastern.

800-986-1250 sales@spectis.us

Builders, designers, and customers: if Spectis products or the installation steps are modified, you agree to indemnify, defend, and hold harmless Veritas Products LLC, veritasproducts.com, and spectis.us from any claimed loss or damage, regardless of other instructions.

View AllClose

Videos

View AllClose

Warranty Information

Spectis Moulders Inc. warrants its products against defects in materials and workmanship for a period of five years from date of purchase, to the original end user, when used and installed under recommended conditions. If the product is not painted immediately following installation, the warranty will be for a period of 1 year from date of purchase. Read the full Spectis warranty explanation.
View AllClose

Related Products

Related Products